V-color STANDARD ECC R-DIMM TR516G48S840O DDR5 128GB (8x16GB) 4800 CL40 1.1V 288-Pin 1Rx8
- 128 GB (8 × 16 GB)
- DDR5 4800
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Eight-module DDR5 5600 CL46 ECC registered kit totalling 128 GB at 1.1 V
Capacity 128GB (8 x 16GB)
Speed DDR5 5600 (PC5 44800)
Rank 1Rx8
This 128GB kit provides eight 16GB DDR5 registered DIMMs rated at 5600MHz with CL46 latency. It targets administrators who need maximum memory density in servers and workstations that require ECC registered modules. The 1Rx8 organisation and 1.1V operation suit platforms built for 288-pin DDR5 RDIMMs.
Operating at the standard 1.10V DDR5 voltage keeps power draw predictable for dense configurations. The modules use a bare PCB without a heat spreader, relying on chassis airflow for cooling. Registered buffering and on-die ECC add minimal latency overhead while maintaining signal integrity across all eight slots under sustained workloads.
This kit replaces smaller DDR5 RDIMM sets or fills empty slots on compatible server boards that support 128GB per channel. It is not suitable for desktop PCs, consumer motherboards or any system requiring unbuffered non-ECC memory. Buyers needing higher per-module density beyond 16GB or speeds above 5600MHz must verify platform qualification before purchasing.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | V-Color |
| Product line | STANDARD ECC R-DIMM |
| Model name | TR516G56S846O |
| Part number | TR516G56S846O |
| Total capacity | 128 GB (8 × 16 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | SK Hynix IC |
| Memory | |
| CAS latency | CL46 |
| Memory timings | 46-45-45-90 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
Other versions of this model
Align the notch on each 16 GB stick with the motherboard slot key, press firmly until both latches click, and seat all eight modules before powering on — the step people skip is verifying the platform requires registered ECC memory, because these will not work in desktop boards.
The modules have no heat spreader and no moving parts, so no routine maintenance is required; replacement only becomes necessary if a DIMM fails ECC correction or the server is upgraded beyond the 128 GB total capacity.
The CL46 latency at 5600 MT/s and 1.10 V set the throughput ceiling, so sustained workloads will hit the bandwidth limit of the PC5-44800 rating before thermal throttling becomes a factor.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?