Value Brand 1/2" OD Nylon Natural 100 ft Tubing
Nylon tubing with 1/2 in outside diameter and 100 ft length, rated 267 psi at 68 Degrees F and usable from -4 to 175 Degrees F
- Handles up to 267 psi working pressure at 68 °F
- Operates from -4 °F to 175 °F for wide temperature range
- Resists vacuum up to 28 in Hg for suction applications
- Nylon construction with Shore D 60 hardness for durability
- Precise ±.002 in tolerance ensures consistent fit
What this tubing is and who it suits
This 100-foot nylon tube has a 1/2-inch outside diameter and a 3/8-inch inside diameter. It is built for pneumatic or low-pressure fluid lines that need a natural-colour, semi-rigid hose. The Shore D 60 hardness gives enough stiffness to resist kinking while staying flexible for routing. It is not for high-temperature hydraulic systems or applications above 175 Degrees F.
Installation notes and common issues
The tubing cuts cleanly with a sharp knife and pushes onto barbed fittings without heat. Its tolerance of +0.002 in to -0.004 in means the OD stays consistent for compression fittings. A frequent mistake is exceeding the 267 psi working pressure at 68 Degrees F; pressure capacity drops as temperature rises. Always secure connections with clamps if vibration is present.
Capacity, pressure headroom and limits
The 100-foot coil covers long runs without splices. Working pressure is rated at 267 psi with a 600 psi burst margin, and it holds a full 28 in Hg vacuum. The operating window spans -4 Degrees F to 175 Degrees F, so it handles cold starts and moderate heat. It runs out of headroom in sustained high-heat, high-pressure cycles or where chemical compatibility with nylon is not verified.
How it compares
Measured against everything we stock in Garden Hoses & Pipe Tubing, at today’s prices. Recalculated every night.
- Price $100.99
- Pricier than about 87% of the 973 comparable items (median $21.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
Questions about this item
How can I confirm the 1/2 in OD tubing is performing correctly after installation?
Verify system pressure stays at or below 267 psi at 68 °F and check for leaks; the nylon tube is rated for vacuum to 28 in Hg and burst pressure of 600 psi.
What comes with the 100 ft roll and what fittings must I supply?
The box contains only the 100 ft natural nylon tube (3/8 in ID, 1/2 in OD, 1/16 in wall); compression or push-to-connect fittings for 1/2 in OD tubing are not included.
Which tube specification should I select for a 267 psi air line at 68 °F?
This 1/2 in OD nylon tube with Shore D 60 hardness, 3/8 in ID and 1/16 in wall meets the 267 psi working pressure and -4 °F to 175 °F temperature range.
More in Garden Hoses & Pipe Tubing





