We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron 45-degree street elbow with threaded ends

Value Brand

Value Brand 1" FNPT x MNPT Galvanized 45 Degree Street Elbow coupling

SKU CH-E2H8-36R36

Connects 1-inch NPT pipes at a 45-degree angle with galvanized malleable iron rated to 300 psi WOG and certified to ASME B16.3, B16.4, ASTM A197, A47, FM, NSF-61, AB1953 and UL standards

  • 45-degree elbow routes pipe around obstacles
  • Galvanized malleable iron resists corrosion in water lines
  • Class 150 rating handles 300 psi at 150 °F
  • Meets ASME B16.3, B16.4, ASTM A197, A47 standards
  • NSF-61 and AB1953 listed for potable water use

1" FNPT x MNPT 45° Street Elbow

This galvanised malleable iron street elbow connects a female NPT thread to a male NPT thread at a forty-five degree angle. It is rated for three hundred psi water, oil or gas at one hundred fifty degrees Fahrenheit and one hundred fifty psi saturated steam. The fitting meets ASME B16.3, B16.4, ASTM A197 and A47 standards and carries FM, NSF-61, AB1953 and UL listings.

Class 150 galvanised malleable iron build

The Class 150 construction provides a robust thread profile that resists stripping during assembly and service. Galvanised coating protects the iron from corrosion in water supply and compressed air lines. The street pattern allows direct connection to a female-threaded component without an extra nipple, saving space in tight piping runs.

Check thread standard

Verify that your system uses NPT threads and operates within the three hundred psi WOG or one hundred fifty psi steam limits. Confirm that galvanised malleable iron is compatible with the fluid being conveyed and that local codes accept the listed approvals. This fitting is not suitable for applications requiring stainless steel or higher pressure classes.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 83% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameZoro Select

Questions about this item

What pressure does the ASME B16.3 Class 150 rating cap at 150 °F?

The fitting is rated for 300 psi water, oil or gas at 150 °F and 150 psi saturated steam per the ASME B16.3 and B16.4 Class 150 standard.

What pipe size and thread combination does the 1 in FNPT x MNPT street elbow require?

It connects a 1 inch female NPT thread on one end to a 1 inch male NPT thread on the other, so both mating parts must be 1 inch NPT.

How do you seal the tapered NPT threads without cracking the galvanized malleable iron?

Apply PTFE tape or pipe dope to the male threads only, hand-tighten, then wrench-tighten one to two turns — over-torquing splits the fitting.

More in Hose Fittings, Adapters & Clamps

Similar items