We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round red 12mm indicator light with brass plated chrome bezel

Value Brand

Value Brand 12V Red Indicator Light 12mm 24M109

SKU CH-4MB9-ECTD2

A 12 V DC red LED panel indicator with a 12 mm mounting diameter, 20 mA draw, IP40 rating and 100 000-hour average life

  • Brand nameZORO SELECT
  • Engine size12 mm Mounting dia
  • Red LED indicator for clear status signalling
  • 12 V DC operation suits vehicle and industrial systems
  • 20 mA draw minimises power consumption
  • 100 000 hour average life reduces replacement frequency
  • IP40 rating protects against solid particles

12 V Red Panel Indicator

This 12 mm round indicator light provides a red LED signal for 12 V DC control panels and automotive electrical systems. It mounts in a standard 12 mm panel cut-out and draws 20 mA. The brass-plated chrome bezel and ABS housing suit industrial and vehicle environments. Rated for 100,000 hours average life under normal conditions.

Simple Quick-Disconnect Wiring

Installation uses a 0.11 inch male quick-disconnect terminal that pushes onto a matching female connector without tools. No soldering is required for typical panel builds. The main issue is forcing the terminal onto an undersized or oxidised mate, which can loosen the connection and cause intermittent illumination. Ensure the panel thickness does not exceed 0.160 inch so the retaining nut seats fully and the IP40 seal is maintained.

Verify Voltage and Panel Cut-Out

Confirm the supply is 12 V DC; higher voltage will damage the LED and lower voltage may not light it. Check that the mounting hole is 12 mm diameter and the panel material is thin enough for the 0.160 inch maximum thickness. The cRUus and RoHS markings cover component safety compliance. Buyers needing a different colour, voltage, or IP rating should select another part.

How it compares

Measured against everything we stock in Bench & DC Power Supplies, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 85% of the 677 comparable items (median $33.99).

Specifications

Product
Brand nameZORO SELECT
Size & build
Engine size12 mm Mounting dia

Questions about this item

How can I confirm the 12 V DC indicator light is operating correctly after installation?

Apply 12 V DC and verify the red LED illuminates steadily while drawing approximately 20 mA.

What components are included and what must be sourced separately for the 12 mm panel light?

The indicator light itself is supplied; you must provide a 12 V DC power source and 0.11 inch male quick-disconnect terminals or mating connectors.

Which version of the 12 mm red indicator light should I select for a panel up to 0.160 in thick?

Choose the 12 V DC, IP40 rated model with cRUus and RoHS markings; it fits panels up to 0.160 in and mounts in a 12 mm hole.

More in Bench & DC Power Supplies

Similar items