Value Brand 22-1/2 Deg Elbow 1-1/2 In Hub x Hub Schedule 40
A 22-1/2 degree ABS elbow joins 1-1/2 inch hub connections in Schedule 40 systems
- ABS construction resists corrosion in drain systems
- 22-1/2 degree angle enables gradual flow direction changes
- Hub-to-hub solvent weld creates permanent leak-free joints
- Schedule 40 wall handles pressure in residential plumbing
- ASTM D3965 cell class 32222 certifies material quality
22-1/2 Degree Elbow for ABS Pipe
This 22-1/2 degree elbow connects two 1-1/2 inch ABS pipes using a hub-by-hub joint. It is manufactured to Schedule 40 dimensions and meets ASTM D3965 cell class 32222. The fitting suits residential and commercial drain, waste and vent systems where a gentle directional change is required.
Check pipe material and solvent cement
Verify that the existing pipe is ABS and not PVC, because the solvent cement must match the material. Confirm the pipe outside diameter matches the 1-1/2 inch hub size so the joint seats fully. Ensure local code accepts Schedule 40 ABS fittings for the intended drainage application before installation.
Temperature performance under continuous flow
The fitting is rated for continuous service from -40 degrees to 180 degrees Fahrenheit. Within this range the ABS material retains its rigidity and impact resistance during sustained hot-water discharge. Prolonged exposure near the upper limit will not cause softening that compromises the hub seal.
How it compares
Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.
- Price $1.63
- Cheaper than about 95% of the 2,955 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
Questions about this item
What comes in the box and is anything else needed to install it?
The box contains one 22-1/2 degree Schedule 40 ABS elbow with hub connections on both ends. Solvent cement and primer rated for ABS are required to join it to pipe but are not included.
Why select the Schedule 40 version over other classes?
Schedule 40 matches standard 1-1/2 inch ABS pipe dimensions and pressure ratings. Cell class 32222 per ASTM D3965 confirms the material meets that schedule's requirements.
What does the 180 degree Fahrenheit temperature limit mean for a drain line?
The fitting handles continuous discharge up to 180 degrees Fahrenheit, covering typical residential hot-water waste. Exceeding that temperature can soften the ABS material.
More in Hose Fittings, Adapters & Clamps
Similar items
Value Brand
Value Brand 1/2" MNPT x MNPT Black Pipe Nipple Schedule 40 8 in
$1.63
0.00001997BTC
In stock
Black Box Corporation
Black Box Corporation FOT120 SC SC Rectangular Fiber Optic Coupling
$14.99
0.00018361BTC
In stock