We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Nickel-plated brass 90-degree elbow with 1/4-inch tube and MNPT connection

Value Brand

Value Brand 22FR86 1/4" Tube x MNPT Nickel Brass 90 Degree Elbow

SKU CH-5599-K2CMK

A 1/4-inch tube-to-MNPT nickel-plated brass elbow rated for 160 degrees Fahrenheit

  • 90-degree elbow routes tubing in tight spaces
  • 1/4-inch tube and MNPT ends connect without adapters
  • Nickel-plated brass body resists corrosion in wet environments
  • Nitrile rubber gasket seals reliably from 0 to 160 degrees F
  • California Proposition 65 notice included for regulatory compliance

1/4" Nickel Brass Elbow for Tube Connections

The Value Brand 22FR86 fitting connects a 1/4 inch tube to a male NPT thread at a 90 degree angle. It is built from nickel plated brass with a nitrile rubber gasket. The component is rated for temperatures from 0 to 160 degrees F. It suits plumbing or fluid transfer systems needing a compact directional change.

Straightforward Threaded Installation

The elbow installs by threading the MNPT end into a matching female port and securing the tube side with a compatible compression nut. Leaks typically appear if the thread sealant is insufficient or the tube nut is not tightened to the correct torque. The nitrile gasket requires a clean, undamaged seating surface to seal properly. Over tightening the brass body can distort threads.

For 1/4 Inch Tubing Systems Only

This fitting suits installers working with 1/4 inch outer diameter tubing and male NPT threads. It will not fit metric tubing, larger pipe sizes, or female thread ports. Buyers needing a straight coupling, a different angle, or a material such as stainless steel should look at other fittings. The Prop 65 notice applies to the brass alloy used.

How it compares

Measured against everything we stock in Bath Accessories & Soap Dispensers, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 96% of the 1,499 comparable items (median $39.99).

Specifications

Product
Brand nameZORO SELECT
Product typeOther

Questions about this item

How do I confirm the 22FR86 elbow is sealing correctly after installation?

Pressurise the line up to the 160 °F temperature rating and check the 1/4 in tube and MNPT joints for leaks; the nitrile rubber gasket should hold without weeping.

What comes with the 22FR86 fitting and what must I supply?

The box contains the nickel-plated brass 90-degree male elbow with its nitrile gasket; you must provide 1/4 in tubing, pipe thread sealant and any mounting hardware.

Which version of the 22FR86 should I choose for a 1/4 in tube system?

The 22FR86 is a single SKU — 1/4 in tube by 1/4 in MNPT, 90-degree nickel-plated brass — so select this model when your tube and pipe threads are both 1/4 in.

More in Bath Accessories & Soap Dispensers

Similar items