Value Brand 24 in Square Pegboard Panel 2 Pack
Two 24 in square steel pegboard panels hold 300 lb each for a combined 600 lb load capacity
- Square-hole grid accepts standard peg hooks
- 300 lb panel load rating keeps tools secure
- Powder-coated steel resists rust and wear
- Two panels provide 4 sq ft of storage
- 600 lb combined capacity handles heavy equipment
Two-Pack 24-Inch Square Pegboard Panels
This two-pack provides two 24-inch square steel pegboard panels for organising tools and supplies. Each panel offers four square feet of storage area with a 300 lb load capacity. The powder-coated blue finish resists corrosion in workshop or garage environments. Panels arrive unassembled for custom mounting configurations.
Upgrade from Loose Storage or Single Panels
Replacing scattered bins or a single board with this paired set doubles the usable wall space for hanging items. The 300 lb per panel rating supports heavier hand tools and equipment that would overload lighter plastic alternatives. The jump is worthwhile when a single board no longer holds the full inventory or when matching panels create a uniform workspace.
Square-Hole Pattern Limits Hook Compatibility
The 3/8-inch square holes on 1 1/2-inch centres accept only square-peg hooks and accessories. Round-peg systems will not fit this pattern, so existing hook collections may need replacement. The 600 lb combined unit capacity assumes proper wall anchoring into studs or blocking; drywall alone will not support the rated load.
How it compares
Measured against everything we stock in Storage Sheds & Accessories, at today’s prices. Recalculated every night.
- Price $63.99
- Pricier than about 87% of the 882 comparable items (median $13.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
Questions about this item
What wall spacing do the 1 1/2 in peg holes need for mounting brackets?
The square peg holes are spaced 1 1/2 in apart, so mounting hardware must align with that grid; use furring strips or shims if studs fall on different centres.
Which side of the 1/2 in deep panel faces the wall during installation?
Only one side is usable; hang the panel with the powder-coated blue finish facing out and the flat reverse against the wall or furring strips.
When should the 300 lb per panel load limit be re-checked?
Inspect hooks and wall anchors annually or after adding heavy items; redistribute weight if any panel approaches its 300 lb rating.
More in Storage Sheds & Accessories





