Value Brand 24D006 Compression Lug 250 kcmil 3/8 in Stud Long
One-hole copper compression lug for 250 kcmil stranded wire with 3/8 in stud, long barrel, yellow colour code, die code 62, inspection hole, seamless crimp, UL listed and CSA certified.
- Product typeElectrical Connectors
- Rated for 35 kV maximum voltage
- UL Listed and CSA Certified for code compliance
- Seamless copper barrel resists cracking under load
- 1 in tongue width fits 3/8 in stud securely
- Inspection hole allows visual crimp verification
ZORO SELECT 250 kcmil Compression Lug
This copper lug accepts a single 250 kcmil stranded copper conductor and a 3/8 in stud. The long barrel and yellow colour code identify the correct die size for crimping. It is suited for electrical contractors and maintenance teams terminating heavy-gauge cable in panels or equipment.
Crimp installation with standard tooling
A hydraulic or manual crimper using die code 62 forms the connection. The seamless barrel and inspection hole let the installer verify full conductor insertion before final compression. Mis-sized dies or incomplete crimps are the common cause of high-resistance joints.
Verify conductor size and stud clearance
Confirm the cable is exactly 250 kcmil stranded copper; the lug is not rated for smaller or larger conductors. Check that the 1.1 in tongue width fits the busbar or terminal spacing and that the straight tongue angle matches the layout. The lug is UL Listed and CSA Certified for 35 kV maximum at 257 Degrees F.
How it compares
Measured against everything we stock in Wire, Cable & Wiring Supplies, at today’s prices. Recalculated every night.
- Price $3.99
- Cheaper than about 92% of the 1,610 comparable items (median $25.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Product type | Electrical Connectors |
Questions about this item
How can I verify the crimped connection is solid after installation?
Check that the copper conductor is fully visible through the inspection hole and that the crimp die code 62 matches the tool marking for 250 kcmil wire.
What comes with the lug and what must I supply myself?
The lug itself is supplied; you must provide 250 kcmil stranded copper wire and a compatible crimping tool for die code 62.
Which version should I choose for a 3/8 in stud and long barrel?
This model is built for 250 kcmil copper wire, 3/8 in stud size, long barrel, yellow colour code and die code 62.
More in Wire, Cable & Wiring Supplies
Similar items
PREMIERE RACEWAY PRODUCTS Wire Hider FRA-33414 1-1/2" White Right Angle Self Adhesive
Unique-Bargains 90pcs PH2.0 Female Pin Terminal Connector
- Jumper Cable
PREMIERE RACEWAY PRODUCTS 53414 1-1/2" Outside Corner White Self Adhesive
Thomas & Betts Blackburn BTC0208 Copper Lug Terminal 8-2 AWG 10-Pack
- Copper
- 2STR-8STR AWG TRMIN…





