We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug, long barrel, one hole, 3/8 inch stud

Value Brand

Value Brand 24D008 Compression Lug 300 kcmil 3/8 in Stud Long

SKU CH-YGPA-MZD2G

A copper compression lug for 300 kcmil stranded wire with a 3/8 in stud, long barrel, seamless seam, UL listed, rated to 35 kV and 257 Degrees F

  • Product typeElectrical Connectors
  • 35 kV rating supports high-voltage applications
  • Seamless copper barrel ensures reliable conductivity
  • Long barrel design fits 300 kcmil stranded wire
  • UL Listed for code-compliant installations
  • 3/8 in stud with straight tongue simplifies mounting

300 kcmil Copper Compression Lug

This Value Brand compression lug is a single-hole copper connector rated for 300 kcmil stranded copper wire. It features a 3/8 inch stud hole, a long barrel and a seamless crimp design. The connector carries a UL listing and a maximum voltage rating of 35 kV.

Installers needing a 300 kcmil straight lug

Electricians terminating a single 300 kcmil copper conductor to a 3/8 inch stud will find this lug matches the spec. It is not suited for smaller wire sizes, multi-hole mounting patterns or applications requiring an inspection window in the barrel.

Long-barrel seamless crimp under load

The seamless barrel and long barrel length distribute crimp force evenly across the full 300 kcmil conductor. Rated to 257 degrees F maximum operating temperature, the copper body maintains conductivity during sustained high-current cycles without a seam to fatigue.

How it compares

Measured against everything we stock in Wire, Cable & Wiring Supplies, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 80% of the 1,610 comparable items (median $25.99).

Specifications

Product
Brand nameZORO SELECT
Product typeElectrical Connectors

Questions about this item

What crimping die code is required to terminate the lug properly?

Use die code 66 with a compatible crimping tool to form the connection on the seamless copper barrel.

Will the 1.19 inch tongue width fit the existing 3/8 inch stud on my bus bar?

Yes, the lug is drilled for a 3/8 inch stud and the tongue measures 1.19 inches wide for that hardware.

How can I verify the crimp meets the UL listing after installation?

Inspect the crimp for full die impression and measure barrel compression; the lug carries a UL listing when crimped with the correct die.

More in Wire, Cable & Wiring Supplies

Similar items