Value Brand 24M022 Raised Panel Light Green 12 V DC 6mm
Green LED panel indicator mounts in a 6 mm hole, runs on 12 V DC at 20 mA, and is rated for 100 000 hours at IP40
- Brand nameZORO SELECT
- Engine size6 mm Mounting dia
- Raised panel design eases installation in 6mm cutouts
- Green LED provides clear status indication at 12V DC
- Low 20mA draw reduces power consumption
- IP40 rating protects against solid particles
- 100000 hour average life extends service intervals
Raised Panel LED Indicator
This raised-panel indicator mounts in a six-millimetre hole and runs on twelve-volt direct current. A green LED provides clear status illumination for industrial control panels and automotive dashboards. Brass-plated chrome housing and ABS plastic body resist vibration in mobile equipment. The unit draws twenty milliamps and carries an IP40 rating for dust protection.
Upgrade from incandescent pilot lights
Replaces filament lamps that burn out after a few thousand hours with a solid-state LED rated for one hundred thousand hours average life. The jump is worth it when maintenance access is difficult or when panel vibration shortens bulb life. Solder-lead connections suit permanent wiring harnesses rather than quick-disconnect terminals.
Limits of twelve-volt DC and IP40
Operation is fixed at twelve volts DC; no internal resistor allows higher supply voltages without external circuitry. IP40 blocks solid objects but offers no water ingress protection, so the indicator suits enclosed cabinets only. Panel thickness must not exceed one hundred sixty thousandths of an inch for secure mounting.
How it compares
Measured against everything we stock in Bench & DC Power Supplies, at today’s prices. Recalculated every night.
- Price $2.99
- Cheaper than about 95% of the 677 comparable items (median $33.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Size & build | |
| Engine size | 6 mm Mounting dia |
Questions about this item
What panel thickness and hole size does the 6 mm mounting diameter light require?
The light fits panels up to 0.160 in thick and mounts in a 6 mm diameter hole.
How is the 12 V DC LED wired, and what mistake should be avoided?
Leads are for soldering; apply 12 V DC with correct polarity and avoid overheating the ABS body during soldering.
When should the green LED be replaced given its rated life?
Rated at 100,000 hours average life; plan replacement when brightness drops noticeably after extended use.
More in Bench & DC Power Supplies
Similar items
Value Brand Terminal Strip 4 Pole 2 Row 20 A 300 V 12 AWG Screw
- ZORO SELECT
Samlex America Evolution F Series 1200W 120V Pure Sine Wave Inverter Charger 24V 40A
- Samlex America
Zoro Select 20C858 Miniature Indicator Light Green 120V 5/16 in Mounting
- ZORO SELECT
- 5/16 in Mounting dia
Schneider Electric 9001KY2 30 mm 2-Hole Aluminum Enclosure
- SCHNEIDER ELECTRIC





