Value Brand 3/4" x 1/2" Black Forged Steel Bushing

Fitting for 3/4 in x 1/2 in pipe reduction

This forged steel bushing reduces a 3/4 inch NPT pipe opening to a 1/2 inch NPT connection. It meets ANSI B 1.20.1, ASME B 16.11 and ASTM A105 standards for threaded pipe fittings. The component is rated for a maximum pressure of 3000 psi at 72 degrees Fahrenheit. It suits plumbing and hydraulic systems requiring a durable, high-pressure reducer.

Class 3000 forged steel holds pressure under

The Class 3000 rating means the fitting sustains 3000 psi at 72 degrees Fahrenheit without permanent deformation during prolonged service. Forged construction eliminates the porosity found in cast alternatives, preserving wall integrity when pressure cycles repeat. Material conformance to SA105 ensures consistent mechanical properties throughout extended operating periods.

NPT threads seal with standard pipe dope or tape

Installation requires only common thread sealant applied to the male NPT threads before tightening into the female ports. The tapered thread profile creates a mechanical seal as engagement deepens. Over-tightening risks cracking the forged body or splitting the female fitting, so the joint should be stopped once resistance increases sharply. No special tools beyond standard pipe wrenches are needed.