We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
316 stainless steel tee fitting, 1-1/2 inch FNPT, Class 150, polished silver finish

Value Brand

Value Brand 316 Stainless Steel 1-1/2" FNPT Tee Class 150

SKU CH-Z6GA-5642D

A 316 stainless steel FNPT tee rated Class 150 for 300 psi pressure service

  • 316 stainless steel resists corrosion in harsh environments
  • Class 150 rating handles up to 300 psi working pressure
  • FNPT threads seal directly without extra adapters
  • Meets ANSI B 1.20.1 for reliable interchangeability
  • Tee design splits flow in three directions

316 Stainless Steel FNPT Tee

The Value Brand 316 Stainless Steel Tee is a Class 150 pipe fitting designed for fluid distribution systems. It features a 1-1/2 inch FNPT threaded connection on all three ports. The 316 stainless steel construction provides corrosion resistance for water, oil, and gas lines. This new fitting meets ANSI Standards B 1.20.1 requirements.

Industrial Plumbing and Fluid Systems

This tee suits installers joining three sections of 1-1/2 inch FNPT threaded pipe in a T-configuration. It handles maximum pressures of 300 psi and steam pressures up to 150 psi. Buyers needing a different pipe diameter, connection type, or higher pressure rating should look at alternative fittings. The Class 150 rating defines its pressure-temperature envelope.

Class 150 Pressure Rating Decides Fit

The single specification that decides suitability is the Class 150 rating with a 300 psi maximum pressure limit. Systems operating above this pressure require a higher-class fitting regardless of material. Verify your system design pressure against this 300 psi ceiling before selecting this part. The 316 stainless steel body supports the rated pressure at standard temperatures.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $21.99
Pricier than about 57% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameZORO SELECT

Questions about this item

What thread standard does the 1-1/2" FNPT connection follow?

The female NPT threads conform to ANSI B1.20.1, so any matching male NPT pipe or nipple will seal correctly when assembled with proper thread sealant.

Which step do installers often skip when making up the FNPT joints?

Applying PTFE tape or pipe dope to the male threads before tightening is the step most often missed; without it the tapered threads can leak at the rated 300 psi.

When should the tee be inspected or replaced in a steam line?

Inspect the 316 stainless body and threads annually for corrosion or erosion; replace the fitting if thread deformation or wall thinning appears, especially near the 150 psi steam rating limit.

More in Hose Fittings, Adapters & Clamps

Similar items