We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron 90 degree reducing elbow 1/2 by 1/4 inch female NPT

Value Brand

Value Brand 5P444 90 Degree Reducing Elbow 1/2" x 1/4

SKU CH-7VKR-TVTWT

A 90-degree reducing elbow connects 1/2" and 1/4" female NPT threads in malleable iron rated to Class 150

  • 90° reducing elbow connects 1/2" and 1/4" NPT female threads
  • Malleable iron construction rated for Class 150 service pressure
  • ZORO SELECT brand fitting for plumbing and piping systems
  • Compact design enables tight-angle directional changes in pipe runs
  • Female NPT threads on both ends ensure secure leak-resistant joints

Reducing Elbow 1/2" to 1/4" NPT

This malleable iron fitting redirects flow through a 90 degree angle while stepping down from a half inch female NPT port to a quarter inch female NPT port. It suits plumbing and compressed air systems that require a compact direction change with a size reduction.

Class 150 Pressure Rating Limits

Rated for Class 150 service, the elbow handles standard low pressure water, air and oil lines within that pressure class. It is not intended for high pressure hydraulic circuits or steam service that exceed the Class 150 designation.

Two Female NPT Ports for Direct Threading

Both ends accept male NPT threads without adapters, simplifying assembly on existing pipe nipples or valves. The fixed half inch and quarter inch sizing means it cannot connect lines of the same diameter or adapt to metric or BSP threads.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $1.99
Cheaper than about 94% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameZORO SELECT

Questions about this item

Should I choose the 1/2" or 1/4" side for my supply line?

The 1/2" end handles the larger supply run while the 1/4" end feeds the smaller branch, so match each side to the pipe size it connects to.

What does the Class 150 rating mean once the elbow is installed?

It certifies the malleable iron body for 150 psi working pressure at ambient temperature, so the joint holds that pressure in service.

How do the NPT threads affect the seal in practice?

The 1/2" and 1/4" female NPT threads taper to create a pressure-tight seal when tightened with pipe dope or tape on the male nipples.

More in Hose Fittings, Adapters & Clamps

Similar items