Value Brand 6V 2.8Ah Sealed Lead Acid Light Kit

6V 2.8Ah AGM battery kit

This sealed lead-acid battery uses AGM construction and delivers 6V DC at 2.8Ah capacity. It suits general-purpose applications such as emergency lighting, alarm panels or small UPS units. The top-mounted Faston terminals allow quick wiring without tools. Rechargeable for up to three years, it fits devices that specify a CP6-2.8 cross-reference.

Practical limits of sealed lead-acid chemistry

The battery requires approximately 16 hours for a full recharge, so it is not suited to frequent deep-cycling or rapid-turnaround use. Maximum operating temperature is 140 degrees Fahrenheit; sustained exposure above this level will shorten service life. The ABS housing and AGM electrolyte resist leakage, but the unit must remain upright and ventilated. California Proposition 65 warnings apply due to lead content.

2.8Ah capacity decides fit

Capacity of 2.8Ah determines how long the battery can power a given load before recharge is needed. Verify that the device’s current draw and required runtime match this rating. Physical dimensions are 3.94 inches high, 2.6 inches wide and 1.3 inches deep; confirm the compartment accommodates these measurements. Terminal type and location must also match the equipment’s connector layout.