Value Brand Commercial Pressure Gauge 0 to 5000 psi 2 1/2 in Dial 1/4 in NPT

Commercial Pressure Gauge 0-5000 psi

The Value Brand commercial pressure gauge measures from 0 to 5000 psi on a 2 1/2 inch dial with a 1/4 inch NPT male connection. It is built for technicians who need reliable readings in hydraulic or pneumatic systems. The 304 stainless steel case and acrylic lens resist corrosion in harsh environments. This tool suits maintenance crews and plant operators monitoring high-pressure lines.

Upgrade from lower-range or non-liquid gauges

Replace gauges that lack liquid-filled vibration resistance when equipment pulsation blurs the needle. The jump is worth it if your current gauge reads inaccurately near 5000 psi or suffers from needle flutter. The +/-3-2-3 percent accuracy class tightens tolerance across the full scale. Do not choose this gauge if you need a field-fillable case or a different process connection size.

Simple thread-in installation with sealant

Apply thread sealant to the 1/4 inch NPT male fitting and tighten into the port with a wrench on the stainless steel case flats. The center-back connection orientation points the dial away from the pipe for direct reading. What usually goes wrong is cross-threading the taper or over-tightening, which cracks the acrylic lens or distorts the bourdon tube. The case is not IP rated, so avoid direct wash-down.