Value Brand Dock Bumper 10x4-1/2x11-1/2 in Rubber
A rectangular rubber dock bumper measuring 10 inches high by 11-1/2 inches wide with two bolt-on mounting holes
- Protects vessels with durable rubber construction
- Rectangular 10 by 11-1/2 inch profile absorbs impact
- Bolt-on mounting uses two 13/16 inch holes
- Pre-drilled holes spaced 6 inches on centre
- California Proposition 65 chemical warning applies
Dock Bumper Dimensions
This rectangular rubber bumper measures 10 inches high by 11 1/2 inches wide with a 4 1/2 inch depth. It mounts using two bolt holes of 13/16 inch diameter spaced 6 inches on centre.
Marine Dock Protection
Suits dock owners needing a bolt-on buffer for pilings or seawalls against vessel impact. Not intended for buyers who require curved profiles, integrated lighting or non-rubber materials.
Impact Capacity Headroom
The solid rubber construction absorbs repeated contact from small to mid-size craft during docking manoeuvres. It reaches its limit under sustained heavy commercial traffic or extreme tidal surge loads.
How it compares
Measured against everything we stock in Dock Equipment & Drum Accessories, at today’s prices. Recalculated every night.
- Price $24.99
- Cheaper than about 74% of the 271 comparable items (median $48.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
Questions about this item
What mounting hardware do I need to secure the 13/16 in holes on this bumper?
You will need bolts or lag screws that fit a 13/16 in diameter hole, plus washers and nuts rated for marine use.
Will the 6 in centre-to-centre hole spacing match the brackets on my existing dock?
Measure your current bracket hole centres; if they are 6 in apart the bumper will bolt straight on, otherwise you must drill new holes.
How can I confirm the bumper is seated correctly after installation?
Check that the 10 in height, 11 1/2 in width and 4 1/2 in depth sit flush against the dock face and that both bolts are tight.
More in Dock Equipment & Drum Accessories
