We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red flush panel light with stainless steel bezel and wire leads

Value Brand

Value Brand Flush Panel Light Red 120V AC

SKU CH-9Q4G-3R3PN

A flush-mounted neon indicator with a red polycarbonate lens and stainless-steel bezel for 120V AC panels

  • Red indicator for quick status checks
  • 120 V AC supply fits standard mains wiring
  • 2 mA draw keeps energy use low
  • 25,000-hour life reduces replacement frequency
  • IP40 rating protects against dust ingress

Flush Panel Light Red 120V AC

This ZORO SELECT indicator provides a neon flush-panel light with a red polycarbonate lens and stainless-steel bezel. It mounts in a 1/2 in diameter cut-out and connects via 6 in wire leads for straightforward installation.

Thermals Noise Power

The neon lamp draws only 2 mA at 120V AC, so heat output is negligible and the unit runs silently. An average life of 25,000 hours supports long-term service with minimal maintenance.

Mounting And Compliance

Designed for panels between 0.030 in and 0.093 in thick, it carries CSA and UL listings plus a NEMA 1 and IP40 rating. California Proposition 65 warnings apply for cancer and reproductive-harm chemicals.

How it compares

Measured against everything we stock in Oils, Greases & Fluids, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 94% of the 337 comparable items (median $22.99).

Specifications

Product
Brand nameZORO SELECT

Questions about this item

How do I install the 1/2 in mounting diameter panel light and what step is often missed?

Insert the light through a panel hole sized for 1/2 in mounting diameter, secure the stainless steel bezel, then connect the 6 in wire leads to a 120V AC circuit; the step often missed is verifying panel thickness is between 0.030 in and 0.093 in before tightening.

What maintenance or replacement will the neon indicator need over time?

The neon lamp is rated for an average life of 25,000 hours; after that the light output will fade and the entire sealed unit should be replaced since the lamp is not user-serviceable.

What limit appears first during continuous operation at 120V AC?

The IP40 rating and NEMA 1 enclosure mean dust and moisture ingress is the first practical limit; the light draws only 2 mA so thermal limits are not reached before environmental exposure degrades the nylon body or polycarbonate lens.

More in Oils, Greases & Fluids

Similar items