We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SBR full-face flange gasket with four bolt holes

Value Brand

Value Brand Full Face Gasket 3 in 1/8 in Thick SBR Red

SKU CH-6SAA-M6GVC

Full-face SBR gasket for 3-inch ANSI Class 150 flanges, rated from -20 to 180 degrees F

  • SBR rubber withstands -20 °F to 180 °F
  • Full-face design seals entire ANSI Class 150 flange surface
  • Four Grade A zinc-plated steel bolts included
  • Red colour aids quick visual identification
  • 1/8 in thickness fits standard 3 in pipe flanges

3 in SBR Full-Face Gasket

This full-face flange gasket is made from SBR rubber and coloured red for easy identification. It fits 3 in pipe on ANSI Class 150 flanges and ships with four Grade A zinc-plated carbon steel bolts. The construction targets industrial piping crews who need a ready-to-install sealing kit.

Temperature headroom from -20 F to 180 F

The material stays flexible down to minus 20 degrees Fahrenheit and resists softening up to 180 degrees Fahrenheit. That range covers most water, air and low-pressure steam duties in plant maintenance. It will not survive sustained exposure above the rated ceiling or aggressive chemical attack.

Four zinc-plated bolts included

The bundled fasteners eliminate a separate hardware run and match the 3/4 in bolt holes on the 7 1/2 in outside diameter. Zinc plating protects the bolts against atmospheric corrosion during storage and initial service. No adhesive, lubricant or additional sealing compound is supplied.

How it compares

Measured against everything we stock in Drain Cleaners & Plumbing Tools, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 87% of the 1,087 comparable items (median $57.99).

Specifications

Product
Brand nameZORO SELECT

Questions about this item

Will this 3 in full-face SBR gasket seal against the existing ANSI Class 150 flanges on my current pipework?

Yes — it is made for ANSI Class 150 flanges, has a 3 1/2 in inside diameter, 7 1/2 in outside diameter and four 3/4 in bolt holes that match the standard pattern.

How can I verify the gasket is seated correctly after installation?

Tighten the four included Grade A zinc-plated carbon steel bolts in a cross pattern; the red SBR ring should compress evenly with no visible gaps around the 3 1/2 in bore.

Does the package contain everything needed to bolt the joint, or must I supply my own fasteners?

The box includes the 1/8 in thick full-face gasket plus four Grade A zinc-plated carbon steel bolts — no separate fastener purchase is required.

More in Drain Cleaners & Plumbing Tools

Similar items