We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled natural nylon tubing, 100 ft length, 6 mm outer diameter

Value Brand

Value Brand Nylon Tubing 6 mm OD 4 mm ID 100 ft Natural

SKU CH-9K6R-4CEP8

Nylon tubing with 6 mm OD and 4 mm ID, rated to 400 psi at 68 °F and operating from -4 °F to 175 °F, supplied in a 100 ft natural coil

  • 100 ft length covers long runs without joins
  • 400 psi working pressure handles demanding fluid systems
  • Shore D 60 hardness resists kinking and abrasion
  • 4 °F to 175 °F range suits cold and hot environments
  • 795 psi burst rating adds safety margin

Natural Nylon Tubing for Fluid Transfer

This 100 ft roll of nylon tubing suits pneumatic lines, lubrication circuits and low-pressure hydraulic runs in automotive and industrial maintenance. The natural colour lets you spot fluid movement and contamination at a glance. Shore D 60 hardness keeps the tube rigid enough to resist kinking while still bending around tight routing. It operates from -4 °F to 175 °F for year-round shop use.

Upgrade from Polyethylene or Vinyl Lines

Replace softer tubing that collapses under vacuum or balloons above 400 psi at 68 °F. The nylon wall handles a 795 psi burst rating and holds a full 28 in Hg vacuum without flattening. Switch when chemical resistance to oils, fuels and solvents matters more than the lowest cost per foot. The tighter tolerance of +0.002 in to -0.004 in also improves push-to-connect fitting seal repeatability.

Verify Fitting Compatibility and Routing Space

Confirm your push-to-connect or compression fittings accept 6 mm OD and 4 mm ID dimensions before ordering. The 1/32 in wall thickness sets the minimum bend radius, so check that your harness paths allow the tube to curve without kinking. Ensure system pressure never exceeds 400 psi at 68 °F and that ambient temperature stays within the -4 °F to 175 °F range.

How it compares

Measured against everything we stock in Garden Hoses & Pipe Tubing, at today’s prices. Recalculated every night.

Price $31.99
Pricier than about 64% of the 973 comparable items (median $21.99).

Specifications

Product
Brand nameZORO SELECT

Questions about this item

What size push-to-connect fittings match the 6 mm outside diameter of this nylon tubing?

Use 6 mm OD push-to-connect fittings; the tube has a 4 mm inside diameter and a 1/32 in wall thickness, so the fitting must grip the 6 mm outer surface for a secure seal.

How do I cut and install the 100 ft coil without kinking the Shore D 60 nylon?

Cut squarely with a sharp tube cutter, warm the tubing slightly if stiff, push fully into the fitting until it seats, then pull back gently to confirm the collet has locked on the 6 mm OD.

When should I replace this tubing given its 400 psi rating at 68 °F and -4 °F to 175 °F temperature range?

Replace if you see cracks, hardening, discoloration, or if the system regularly operates near the 400 psi limit at elevated temperatures where the material softens and creep increases.

More in Garden Hoses & Pipe Tubing

Similar items