We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red raised indicator light with stainless steel bezel and polycarbonate lens

Value Brand

Value Brand Raised Indicator Light Red 24V 1/2 in Mounting

SKU CH-04DD-S8VZ4

A red raised indicator light for 24 V AC/DC panels with a 1/2 in mounting diameter, 40 mA draw and 25 000‑hour rated life

  • Brand nameZORO SELECT
  • Engine size1/2 in Mounting dia
  • Red raised indicator light for clear panel visibility
  • 24V AC/DC operation suits industrial control circuits
  • 1/2 in mounting diameter fits standard panel cut-outs
  • 40 mA current draw keeps power consumption low
  • 25,000 hr average life reduces replacement frequency

Product identity

This raised indicator light shows red status on 24 V AC or DC systems and fits a 1/2 in mounting hole. It is built for industrial panels and generator control boards where a compact visual signal is required.

Installation notes

The light mounts through a panel between .030 in and .093 in thick and connects with .187 in tabs. Wrong panel thickness or loose tabs are the common reasons the lamp does not seat or illuminate.

Suitability

It suits maintenance crews and OEM panels that need a UL and CSA listed red pilot light with IP40 protection. Buyers who want a different colour, a higher IP rating, or a voltage outside 24 V should look at something else.

How it compares

Measured against everything we stock in Bench & DC Power Supplies, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 90% of the 677 comparable items (median $33.99).

Specifications

Product
Brand nameZORO SELECT
Size & build
Engine size1/2 in Mounting dia

Questions about this item

How do I confirm the raised indicator light is working after wiring it to a 24V circuit?

Apply 24V AC or DC to the 0.187 in tab terminals; the red lens should illuminate immediately and draw about 40 mA, confirming correct operation.

What comes in the box and what extra parts are needed for a 1/2 in panel cut-out?

The indicator light itself is supplied; you must provide the 24V power source, wiring to suit the 0.187 in tabs, and a panel thickness between 0.030 in and 0.093 in for the 1/2 in mounting hole.

Which version should I choose for a NEMA 1 enclosure needing UL and CSA compliance?

This single model carries both UL Listing and CSA certification, fits a 1/2 in mounting diameter, and meets NEMA 1 and IP40 ratings for the stated panel thickness range.

More in Bench & DC Power Supplies

Similar items