We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White HDPE reducing wye 45-degree bend hub fitting

Value Brand

Value Brand Reducing Wye 45° Bend 4 in x 2 in Hub Schedule 40

SKU CH-A3N0-GPVVX

A reducing wye with a 45-degree bend connects 4-inch and 2-inch ABS pipes via hub connections and meets ASTM D3965 cell class 32222

  • Reduces pipe diameter from 4 in to 2 in with 45° branch
  • High-density polyethylene resists corrosion and chemical attack
  • Schedule 40 wall handles pressure up to 180 °F
  • Meets ASTM D3965 cell class 32222 for material quality
  • Hub × hub × hub connection installs without special tools

Reducing Wye 45° Bend 4 in x 2 in Hub

This reducing wye with a 45-degree bend joins a 4-inch line to a 2-inch branch in drainage or vent systems. The hub-by-hub-by-hub connection accepts ABS pipe with solvent cement. Schedule 40 construction meets ASTM D3965 cell class 32222 for pressure and temperature performance.

Suited for ABS drain waste vent layouts needing

Installers working with PVC or other pipe materials, or those requiring a different angle or diameter combination, will need a different fitting. The hub connection also means this part is not compatible with threaded or mechanical-joint systems.

Schedule 40 rating with ASTM D3965 cell class 32222

This specification confirms the fitting wall thickness and material quality for standard residential and commercial drainage pressure requirements. Verify that your local code accepts this schedule and cell class before installation.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 60% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameMUELLER INDUSTRIES

Questions about this item

What hub sizes does the 4 in x 2 in reducing wye accept?

The fitting has three hub connections sized 4 in, 4 in and 2 in for solvent-weld joints.

How do you install the Schedule 40 hub connections correctly?

Clean each hub and pipe end, apply ABS cement to both surfaces, push fully home and hold for the recommended set time; the common error is skipping the primer or not holding the joint long enough.

When should the ABS reducing wye be inspected or replaced?

Inspect for cracks, joint leaks or distortion if the system sees temperatures near the 180 °F limit or after ground movement; replace any fitting that shows stress whitening or weeping at the hubs.

More in Hose Fittings, Adapters & Clamps

Similar items