Value Brand Two-Hole Compression Lug 400 kcmil 1/2 in Stud Long

Two-Hole Compression Lug 400 kcmil

This two-hole compression lug is rated for 400 kcmil stranded copper conductors and a 1/2 in stud size. It suits installers who need a permanent crimp termination on large-gauge copper wire in industrial or utility applications. The seamless barrel and straight tongue simplify alignment on busbars or equipment pads. Buyers who need a mechanical bolt-on connector or a lug for aluminium conductors cannot use this item.

Long barrel with seamless seam under sustained load

The long barrel provides extended crimp length for mechanical strength when cables carry continuous current up to the 35 kV rating. Copper material and a maximum operating temperature of 257 Degrees F maintain conductivity during prolonged duty cycles. UL Listed construction confirms compliance with relevant safety standards for permanent installations. The absence of an inspection hole means visual verification of wire insertion must occur before crimping.

Blue colour code and 1.75 in hole spacing

Colour code Blue and die code 76 identify the correct crimp tooling for repeatable terminations. Two holes spaced 1.75 in centre-to-centre and a tongue width of 1.41 in match standard NEMA drilling patterns on transformers and switchgear. California Proposition 65 notices advise that the product contains chemicals known to cause cancer and reproductive harm, so appropriate handling precautions apply during installation.