Value Brand Type K Probe Extension Mini 10 ft

Type K Extension for High-Temperature Probes

This 10 ft Type K thermocouple extension cable connects a Type K sensor to instrumentation using small flat plug connectors. The yellow male and female ends identify the Type K polarity for correct wiring. It suits technicians who need to place a probe farther from the meter in industrial or HVAC environments. The cable is rated for continuous exposure up to 500 Degrees F or 260 Degrees C.

Sustained Use at Rated Temperature

The extension maintains Type K signal integrity when the entire 10 ft length sits at the maximum rated temperature of 500 Degrees F. Insulation and conductor materials are selected so that extended dwell at 260 Degrees C does not degrade the thermoelectric voltage or cause drift. This makes the cable reliable for long-duration profiling in ovens, kilns or exhaust streams where the lead wire remains hot for hours.

Thermal and Safety Characteristics

The cable jacket withstands the full 500 Degrees F operating limit without melting or emitting fumes under normal conditions. No active cooling or forced airflow is required because the extension carries only millivolt-level signals and draws negligible power. A California Proposition 65 notice applies because the product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.