VEVOR 1/2" x 8' Steel Core Flipline Arborist Flip Line

Secure 8 ft Steel-Core Flipline for Tree Climbing

The VEVOR steel-core flipline measures 8 ft with a 0.5 in diameter and a 25 kN breaking strength that meets ANSI requirements for fall protection. A 7×19 stainless steel wire core inside high-strength polyester fibers gives the line rigidity for stable flipping and resistance to cuts and wear. Alloy steel snap hook and aluminum alloy carabiner each carry a 23 kN rating, while the rope grab handles 15 kN. The complete kit includes a tool lanyard, storage bag and manual.

Replaces Worn or Non-Compliant Climbing Lines

Swap out an older flip line when its sheath shows abrasion, the core has kinks or the hardware no longer meets the 23 kN connector rating required by current work-at-height rules. The 25 kN line strength and certified hardware make the jump worthwhile for arborists who need documented compliance and a stiffer line that eases upward movement on the trunk. The integrated tool lanyard also removes the need for a separate tether, reducing snag points on the harness.

Check Harness Attachment Points

Verify that your harness bridge or D-ring accepts a carabiner rated to 23 kN and that the snap hook gate opens wide enough for your anchor points. Confirm the rope grab you use is rated for at least 15 kN and operates smoothly on a 12.7 mm diameter line. The 3.75 lb total weight and 2.4 m packed length should fit your existing gear bag, and the manual details inspection intervals you must follow before each climb.