We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Benchtop drill press, cast iron frame, 10 inch swing, tilt table, work light, chuck and key

VEVOR

VEVOR Benchtop Drill Press 10 in 3.2A 5-Speed 650-3100 RPM

SKU CH-D9ME-0QZV4

Benchtop drill press with 10 in swing, 3.2 A induction motor, five speeds from 650 to 3100 RPM, 0-45° tilting table and integrated work light

  • Product typeOther Appliances
  • Overall width13.58
  • 10-inch swing handles large workpieces
  • 2 A induction motor delivers steady power for metal and wood
  • 5-speed range from 650 to 3100 RPM matches material needs
  • 0-45° tilting table enables angled drilling
  • 1/2-inch chuck accepts bits up to 13 mm

Benchtop Drill Press 10-inch Swing

This VEVOR benchtop drill press offers a 10-inch swing and a 3.2A induction motor for drilling wood and metal. It runs on 120V at 60 Hz and includes a 1/2-inch chuck with 2-inch spindle travel. The cast iron frame supports a tilting worktable and integrated work light for workshop or DIY use.

5-Speed Range 650-3100 RPM

Five belt-driven speeds at 650, 1050, 1800, 2350 and 3100 RPM replace single-speed drills when material changes demand different cutting rates. The jump is worth it if you regularly switch between soft wood and harder metal without changing machines. A fixed-speed tool cannot cover this spread.

Induction Motor Sustained Operation

The induction motor and heat-dissipation system maintain output during long drilling sessions rather than fading after short bursts. Spindle travel stays consistent at 2 inches across the speed range. The 13.58-inch width footprint remains stable on the bench while the table locks at angles up to 45 degrees.

How it compares

Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.

Price $107.99
Pricier than about 90% of the 5,998 comparable items (median $24.99).

Specifications

Product
Product typeOther Appliances

Questions about this item

How much bench space does the 10-inch swing drill press need for its base?

The base measures 12-1/2 by 7-5/16 inches, or 319 by 186 mm, so allow at least that footprint plus room for the feed handles.

Which step do owners often miss when assembling the column to the base?

The three M8×16 hex bolts must be fully tightened before mounting the table assembly; skipping this lets the column shift under load.

What part will need replacement after heavy use on metal?

The 1/2-inch chuck and its key wear fastest when drilling steel at the higher 1800 to 3100 RPM settings.

More in Tech Gadgets & Accessories

Similar items