We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Digital hydraulic gauge with stainless steel housing and silicone cover

VEVOR

VEVOR Digital Hydraulic Pressure Gauge 0-10000 PSI 0-700 Bar 1/4 NPT Stainless Steel

SKU CH-M2FX-DM1S7

Digital hydraulic pressure gauge measuring 0-10,000 PSI with ±0.2% accuracy, unit switching, backlight, peak hold, and stainless steel housing

  • Product typeOther Appliances
  • Overall width6.1
  • Measures up to 10000 PSI and 700 Bar for heavy-duty hydraulic systems
  • ±0.2% accuracy sensor with smart chip for reliable real-time readings
  • Switches between Bar, PSI, MPa and kgf/cm² with backlight and peak hold
  • Stainless steel SUS304 housing with silicone cover resists corrosion and impact
  • Includes PTFE tape and desiccants for immediate installation and moisture protection

Universal Digital Hydraulic Gauge

This digital hydraulic pressure gauge measures 0-10000 PSI and 0-700 Bar. It features a 1/4 inch NPT base entry for direct connection to hydraulic systems. The stainless steel housing and silicone cover protect the sensor in excavator and construction machinery environments.

Suited for Maintenance Technicians

Technicians needing real-time pressure readings with ±0.2% accuracy will benefit from the smart chip and unit switching between Bar, PSI, MPa and kgf/cm². Buyers requiring wireless data logging or integrated alarm outputs should look at alternative instruments.

Handles High-Pressure Testing

The gauge comfortably handles continuous hydraulic pressure testing up to the rated 10000 PSI limit. Peak hold captures transient spikes while zero calibration maintains baseline accuracy. It runs out of headroom beyond the 700 Bar maximum range.

How it compares

Measured against everything we stock in Gauges & Tachometers, at today’s prices. Recalculated every night.

Price $64.99
Pricier than about 79% of the 193 comparable items (median $35.99).

Specifications

Product
Product typeOther Appliances

Questions about this item

What thread size must my hydraulic port have for the 1/4 NPT base entry to seal properly?

The gauge has a 1/4 inch NPT male thread; your port needs a matching 1/4 inch NPT female thread and the supplied PTFE tape for a leak-free seal.

Can I leave the gauge on a system that runs above 700 bar without damaging the sensor?

No. The measuring range stops at 700 bar (10,000 PSI); pressures above that exceed the sensor limit and can cause permanent damage.

How do I verify the ±0.2% accuracy claim after I install the gauge?

Apply a known reference pressure within the 0-700 bar range, compare the reading to the reference, and confirm the deviation is within ±0.2% of full scale; use the zero calibration function if needed.

More in Gauges & Tachometers

Similar items