We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four five-foot steel E-track rails with eight O-ring anchors, four D-ring tie-offs and two ratchet straps

VEVOR

VEVOR E Track Tie-Down Rail Kit 18PCS 5ft 2000 lbs

SKU CH-3WS5-E4TA1

E-track tie-down kit with four 5 ft steel rails, eight O-ring anchors, four D-ring tie-offs and two 12 ft ratchet straps rated for 2000 lbs

  • Product typeOther Appliances
  • Overall width6.3
  • 18-piece kit secures motorcycles and cargo with 2000 lbs working load
  • Four 5 ft steel rails provide 30 anchor slots each for flexible tie-down points
  • Eight O-ring anchors and four D-ring tie-offs install directly into E-track slots
  • Two 12 ft ratchet straps deliver 6000 lbs breaking strength for heavy loads
  • 45# steel construction resists deformation at 42.33 lbs total kit weight

E-Track Rail Kit for Cargo

This 18-piece kit contains four 5 ft steel rails, eight O-ring anchors, four D-ring tie-offs and two 12 ft ratchet straps. It provides a complete tie-down system rated at 2000 lbs working load and 6000 lbs breaking strength. The rails are formed from 45# steel measuring 5.20 x 0.09 in with 30 slots each. Designed for securing motorcycles, bikes and general cargo in trailers or truck beds.

Thermals Noise and Power

The product is a passive steel hardware set with no moving parts, electronics or power requirements. It generates no heat and produces no audible noise during use. Load capacity depends on proper anchor engagement within the 0.98 x 2.36 in slots. The 42.33 lb kit weight is the only mass consideration for vehicle payload calculations.

Upgrade From Rope or Single Straps

This kit replaces improvised rope, bungee cords or single ratchet straps that lack a fixed mounting grid. The 30-slot-per-rail layout allows precise anchor placement for multiple tie-down angles. The jump is worthwhile when loads exceed the holding power of friction-based methods or when repeatable, adjustable anchor points are needed for frequent transport. Not suited for applications requiring integrated winches, track-mounted winches or recessed floor tracks.

How it compares

Measured against everything we stock in Specialty Kitchen Gadgets, at today’s prices. Recalculated every night.

Price $65.99
Typical for this category: the median of 3,885 items is $66.99.

Specifications

Product
Product typeOther Appliances

Questions about this item

How do I mount the 5 ft E-track rails and which step do people often miss?

Fasten the four 1524 mm rails to the floor or wall using hardware rated for the 2000 lb load capacity; the step most people skip is confirming that the mounting surface and fasteners can handle the full 6000 lb breaking strength before tightening the 8 O-ring anchors and 4 D-ring tie-offs.

What parts of this 18-piece kit will need inspection or replacement over time?

Check the two 12 ft ratchet straps for fraying or ratchet mechanism wear, inspect the 8 O-ring anchors and 4 D-ring tie-offs for deformation or corrosion, and verify the 30 slots in each 45# steel rail remain free of cracks after heavy use.

Which limit appears first when the kit is used continuously at its 2000 lb rating?

The 2000 lb load capacity is the working limit you will reach first; the 6000 lb breaking strength provides a 3:1 safety margin, so sustained loading at 2000 lbs stays well below the failure point of the 132 mm wide 2.3 mm thick rails.

More in Specialty Kitchen Gadgets

Similar items