We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
VEVOR ALK-T8 fiber fusion splicer in a rugged portable case with 5-inch LCD screen visible

VEVOR

VEVOR Fiber Fusion Splicer ALK-T8 6 Motors 5" LCD 7800mAh

SKU CH-4Y28-DZFAC

Core-alignment splicer with six motors delivers 13-second splicing and heating on a 5-inch LCD, powered by a 7800 mAh battery

  • Product typeOther Appliances
  • 6-second splicing with six precision motors for rapid core alignment
  • 13-second standard splice and heating cycle keeps jobs moving
  • 01 dB fusion loss on multimode fiber for low-loss links
  • 5-inch LCD with 320x single-axis or 200x dual-axis view for clear core inspection
  • 7800 mAh battery plus car charger enables extended field operation

Core Alignment Fusion Splicer

The VEVOR ALK-T8 is a core and clad alignment fusion splicer driven by six high-precision motors. It handles SM, MM, DS and NZDS fibers plus pigtail, bare fiber and patch cable using a 3-in-1 holder. A built-in VFL and optical power meter let technicians verify continuity and measure link loss on site.

Quick Setup With Included Tools

The kit ships with a cleaver, stripper, miller pliers, alcohol bottle, air blower, cooling tray and spare electrodes so the splicer is ready to use after charging. Typical errors come from dirty fiber ends or mis-loaded holders; the 5-inch LCD shows a 320x single-axis or 200x dual-axis view to confirm core alignment before the 9-second fast splice or 13-second standard cycle begins.

Power And Portability Check

The 7800 mAh battery and supplied car charger support field work away from mains power, while the AC adapter covers bench use. The unit weighs 11.8 lbs and measures 7.9 x 5.7 x 5 inches, so confirm your vehicle or tool bag can accommodate the hard case and accessories before ordering.

How it compares

Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.

Price $677.99
Pricier than about 89% of the 1,471 comparable items (median $138.99).

Specifications

Product
Product typeOther Appliances

Questions about this item

How can I confirm the splicer is performing correctly after the first few splices?

Check the LCD for a fusion loss reading at or near .01 dB and verify the cycle completes in roughly 13 seconds for standard splicing or 9 seconds in fast mode.

What tools and consumables are included so I can start splicing immediately?

The kit ships with the splicer, a cleaver, stripper, 3-hole Miller pliers, alcohol bottle, air blower, power adapter and cord, cooling tray, portable case, 100 heat-shrink tubes, brush, 50 cotton swabs, car charger, wire stripper, utility knife, 50 lint-free wipes, 2 spare electrodes and tweezers.

Which configuration suits single-mode, multimode, DS and NZDS fibers without extra holders?

The built-in 3-in-1 holder handles all four fiber types — single-mode, multimode, dispersion-shifted and non-zero dispersion-shifted — so no additional holder purchase is required.

More in SFP & SFP+ Transceiver Modules

Similar items