VEVOR JLD10-5 Belt Grinder 72×2″ 1500W 3 Moulds 3 Belts
A 1500 W variable-speed belt grinder with 72 × 2 inch belts, three grinding moulds and three grit options for metal shaping and knife making
- Product typeOther Appliances
- Overall width17.32
- 1500W motor powers heavy material removal
- 72 x 2 inch belt covers large workpieces quickly
- Variable speed VFD lets you match grit to task
- Three grinding moulds handle flat, curved and circular profiles
- Three included belts at 100, 180 and 240 grit cover coarse to fine finishing
Belt Grinder for Metalworking and Knife Making
This 1500W belt grinder accepts 72 x 2 inch sanding belts and includes three grinding moulds for flat, circular and arc profiles. It is built for workshops that shape, deburr or finish metal stock and knife blanks. Variable frequency drive control lets the operator match belt speed to the material.
Upgrade from Fixed-Speed Bench Sanders
The variable speed drive replaces single-speed bench grinders when heat-sensitive steels or fine finishing demand slower belt travel. The jump is worth it when you regularly switch between heavy stock removal on the flat rack and contour work on the arc rack without changing machines.
Check Power Supply and Workspace Clearance
Verify that your workshop circuit can deliver 1500W at the required voltage before ordering. The unit measures 850 x 300 x 470 mm and weighs 50.25 kg, so confirm bench strength and available floor space for the full footprint.
How it compares
Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.
- Price $730.99
- Pricier than about 91% of the 5,998 comparable items (median $24.99).
Specifications
| Product | |
|---|---|
| Product type | Other Appliances |
Questions about this item
What bench space does the 850 × 300 × 470 mm frame need?
Allow at least 33.46 × 11.81 × 18.50 in on a rigid bench; the 110.78 lb mass requires bolting through the base to prevent vibration shift.
Which step do users skip when fitting the 72 × 2 in belt onto the circular wheel?
After looping the belt, tension the spring-loaded idler until the belt tracks centre; forgetting this causes immediate edge fray on the 100 / 180 / 240 grit belts.
When should the arc grinding rack be swapped for the flat rack?
Change racks when the contact profile no longer matches the workpiece; both racks bolt to the same mounts using the supplied M10 washers and spring washer.
More in Tech Gadgets & Accessories
