We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver pneumatic coil nail gun with side-loading magazine and rubber grip, 283 by 303 by 127 mm

VEVOR

VEVOR MCN55 15° Coil Siding Nailer 1-2¼ in 70-120 PSI

SKU CH-TY8A-25EW3

15-degree pneumatic coil nailer drives 25–57 mm wire-collated nails at 70–120 PSI with a 300–350 nail magazine

  • Product typeOther Appliances
  • Overall width5.51
  • Drives 1 in to 2-1/4 in nails for versatile siding tasks
  • Holds 300 to 350 nails per load for fewer reloads
  • Bumper firing mode speeds work while reducing jams
  • 360° adjustable exhaust directs air away from user
  • Operates at 70 to 120 PSI with standard 1/4 in air inlet

Coil Siding Nailer MCN55

The VEVOR MCN55 is a pneumatic coil nailer built for siding, pallet sheathing, fencing and decking tasks. It drives wire-collated nails from 1 to 2-1/4 inches with head diameters of 5.5 to 5.7 mm. The tool suits professional crews and serious DIYers who need a dedicated 15-degree coil gun for high-volume fastening.

Magazine Capacity and Pressure Range

The side-loading magazine holds 300 to 350 nails at once, reducing reload frequency on long runs. It operates between 70 and 120 PSI, delivering consistent power across that window. Below 70 PSI the gun will not cycle reliably; above 120 PSI you risk seal damage and misfires. The 15-degree collation angle matches standard wire coil stock.

Build Integration and Included Items

A 1/4-inch air inlet connects to any standard compressor hose. The 360-degree adjustable exhaust directs air away from the operator. A safety trigger switch, bump-fire bumper and quick-release nose speed up repetitive work. The package includes safety goggles, an M6 wrench and lubricating oil so the nailer is ready to run out of the box.

How it compares

Measured against everything we stock in Specialty Kitchen Gadgets, at today’s prices. Recalculated every night.

Price $100.99
Pricier than about 71% of the 3,885 comparable items (median $66.99).

Specifications

Product
Product typeOther Appliances

Questions about this item

Does the MCN55 accept a standard 1/4-inch air hose and operate within a 70-120 PSI compressor range?

Yes, it has a 1/4-inch air inlet and a working pressure range of 70 to 120 PSI, so it connects to common hoses and compressors set in that window.

How can I verify the nailer is firing correctly after hooking it up?

Load the side magazine with 300 to 350 wire-collated coil nails, set the compressor between 70 and 120 PSI, engage the safety trigger and bump-fire; consistent drives with no jams confirm proper operation.

What accessories come in the box and what must I supply myself?

The package includes safety goggles, an M6 wrench and lubricating oil; you must supply wire-collated 15-degree coil nails (1 to 2-1/4 inches, 5.5-5.7 mm head, 2.1-2.3 mm shank) and compressed air at 70-120 PSI.

More in Specialty Kitchen Gadgets

Similar items