We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Heavy iron and stainless steel pipe notcher on a rectangular base, adjustable angle scale visible, silver-grey finish

VEVOR

VEVOR PNM1-1/2 Pipe Tube Notcher .5-3 inch 0-50°

SKU CH-R56Q-NP7ND

Notches 0.5 to 3 inch round pipes at adjustable 0 to 50 degree angles using standard hole saws

  • Product typeOther Appliances
  • Overall width10.43
  • Notches 0.5–3 inch pipes without tool changes
  • Adjusts 0–50° for precise angled cuts
  • Works with 1/2–5/8 inch hole saws and drill presses
  • Iron and stainless steel build resists wear
  • 3 kg weight keeps base steady during use

Pipe Notcher for 0.5 to 3 Inch Tubing

This pipe notcher handles round tubing from 0.5 inch to 3 inch diameter, covering a wide range of metalworking tasks without changing tools. The adjustable angle runs from 0 to 50 degrees with a clear scale for repeatable settings. It suits repair shops, home projects and general fabrication where precise notching is required.

Adjustable Angle Limits and Hole Saw Compatibility

The 0 to 50 degree range sets the practical limit for joint angles, so acute or obtuse mitres beyond that span need a different approach. Standard hole saws from 1/2 to 5/8 inch arbor fit the driver, while drill presses, milling cutters and round cutters can also be used. Hole saws are not included, so the operator must supply the correct size for each pipe diameter.

Iron and Stainless Construction with Reinforced Base

The frame combines iron and stainless steel for wear resistance and long service life in a workshop environment. A reinforced base adds stability during cutting, reducing vibration and keeping the workpiece secure. At 20.5 lbs the unit stays put on a bench but can be moved between stations when needed. Dimensions of 11.42 x 7.68 x 8.07 inch fit typical work surfaces without overhang.

How it compares

Measured against everything we stock in Specialty Kitchen Gadgets, at today’s prices. Recalculated every night.

Price $90.99
Pricier than about 66% of the 3,885 comparable items (median $66.99).

Specifications

Product
Product typeOther Appliances

Questions about this item

Which pipe sizes does the PNM1-1/2 notcher cover so I can match my tubing?

It handles round pipes from .5 inch up to 3 inch, or 12.7 mm to 76.2 mm, letting you work on a wide range without swapping tools.

What does the 0 to 50° adjustable angle let me do on a real job?

You can set any angle in that range using the clear scale, so you cut precise copes and mitres for handrails, roll cages or structural joints.

What hole-saw shank does the notcher accept and what does that limit?

It fits standard hole saws with 1/2 to 5/8 inch shanks, so the largest cut diameter is set by the biggest saw in that shank range.

More in Specialty Kitchen Gadgets

Similar items