VEVOR RS1830A-1 72" Dual-Channel Rubber Speed Bump 22000 lbs

Traffic Calming Solution

This 72.05 inch rubber speed bump creates a safer environment for pedestrians and cyclists by reducing vehicle speeds in parking areas and private roads. The one-piece design spans a single lane and includes two integrated channels measuring 1.18 by 0.79 inches to protect cables or hoses routed across the traffic path. Installation hardware comprising four M8 expansion screws and a 12 mm drill bit is supplied for mounting on asphalt or concrete surfaces.

Sustained Load Behaviour

Industrial-grade rubber construction withstands repeated axle loads up to 22000 lbs while resisting water, wear and temperatures down to -40. The material maintains flexibility over long-term exposure, preventing the cracking or permanent deformation that can occur with lesser compounds under continuous heavy traffic. Bright yellow reflective stripes and bead structures remain highly visible in low light, delivering consistent driver warning without degradation.

Installation Constraints

The unit weighs 55.12 lbs net and requires a level, solid substrate able to accept M8 expansion anchors drilled to 100 mm depth. Each 72.05 by 11.81 inch module covers one lane only; additional units must be purchased separately for wider roads or multi-lane applications. Operating temperature is rated above -40, so regions experiencing colder extremes fall outside the specified performance envelope.