We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White and black cylindrical fluid extractor tank with tubes and hoses attached

VEVOR

VEVOR YS-088 Fluid Extractor 1.74 Gal 6.5 L Pneumatic Manual

SKU CH-3AB4-SNHTH

Pneumatic and manual fluid extractor with a 1.74 gallon capacity and four tube sizes for deep automotive fluid removal

  • Product typeOther Appliances
  • Overall width8.66
  • Pneumatic and manual modes suit different workshop needs
  • 74 gal 6.5 L tank holds large fluid volumes
  • Four tube sizes reach deep reservoirs for thorough extraction
  • 4-0.8 MPa air supply enables fast pneumatic operation
  • PP construction weighs 5.80 lbs for easy portability

Dual-Mode Fluid Extractor

The VEVOR YS-088 is a 1.74-gallon (6.5-litre) pneumatic and manual oil changer designed for automotive fluid evacuation. It operates with an air supply of 0.4 to 0.8 MPa via a US-standard 1/4 NPT quick-connect, or by hand pump when compressed air is unavailable. The polypropylene tank measures 7.87 inches in diameter by 19.69 inches tall and weighs 5.80 lbs (2.63 kg).

Replaces Separate Pump and Drain Pan

This single unit replaces a dedicated pneumatic extractor and a gravity drain pan by offering both powered and manual suction in one kit. The jump is worth it when you service vehicles in locations without a shop air line, or when you need quieter operation using the manual mode. It includes a main tube, two extension tubes, a dipstick tube and a suction hose to reach most reservoirs.

Sustained Extraction Behaviour

Under continuous pneumatic use the air valve and silencer maintain steady vacuum at the rated pressure range without rapid pressure drop. The 1.26-inch discharge port and four tube diameters (0.24, 0.28, 0.31 and 0.55 inches) allow consistent flow during long fluid changes. The sealed PP tank and included sealing rings prevent leaks during extended evacuation cycles.

How it compares

Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.

Price $37.99
Pricier than about 70% of the 5,998 comparable items (median $24.99).

Specifications

Product
Product typeOther Appliances

Questions about this item

What size air hose fitting does the 1.74 Gal extractor need?

The pneumatic connection uses a US Standard Quick-Connect with a 1/4 NPT thread, so the air supply hose must match that fitting.

Which tube should I use first when changing engine oil through the dipstick tube?

Start with the 0.24 in or 0.28 in extension tube; the 9.8 in main tube is too wide for most dipstick openings.

What parts wear out and need replacing after repeated fluid changes?

The two sealing rings and the 0.55 in piston rod seal are the primary wear items; keep spares on hand to maintain vacuum.

More in Tech Gadgets & Accessories

Similar items