We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Viega MegaPress union, carbon steel, press connections, 1-1/4 inch size

Viega

Viega 25715 MegaPress union 1-1/4 in x 1-1/4 in

SKU CH-ZZPY-H44FG

Connects two 1-1/4 in pipes with a press-fit carbon steel union rated to 200 psi and 250 °F

  • Press-fit union joins 1-1/4 in steel pipe without threading or welding
  • Carbon-steel body handles up to 200 psi in hydronic or gas lines
  • Rated for continuous service from 0 °F to 250 °F
  • Press-by-press connection cuts installation time on compatible tooling
  • Removable union design allows easy maintenance access at any joint

MegaPress union for carbon-steel pipe

The Viega 25715 MegaPress union joins two 1-1/4 in carbon-steel pipe ends using a press-to-press connection that requires no threading or welding. It is intended for installers who need a permanent, leak-tight joint in hydronic or compressed-air systems where open-flame work is impractical.

Rated for 200 psi and 0 to 250 °F

The carbon-steel body withstands a maximum working pressure of 200 psi across the full temperature range of 0 to 250 degrees Fahrenheit. Pressed joints maintain their seal through thermal cycling without the loosening that can affect threaded fittings.

No additional components required

The fitting arrives ready to press; no gaskets, sealant, thread tape or separate ferrules are needed. A compatible press tool and jaw set complete the installation, reducing the number of parts a technician must carry to the job site.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $128.99
Pricier than about 90% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameVIEGA

Questions about this item

How is the Viega 25715 MegaPress union installed and what step is often missed?

Install by pressing each end with a compatible MegaPress jaw on a press tool; the step often missed is verifying the press indicator ring on both connections to confirm a complete seal.

What maintenance or replacement will the MegaPress union need later?

The carbon steel body with press connections is designed for permanent installation; no routine maintenance is required, but inspect for corrosion if system water chemistry exceeds recommended limits.

What limit appears first on the MegaPress union under sustained high-temperature use?

The temperature rating of 250 degrees F is reached before the 200 psi pressure rating under sustained heat, so thermal limits govern continuous operation.

More in Hose Fittings, Adapters & Clamps

Similar items