We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper tee fitting with three press-fit ends, rolled center stop, EPDM O-rings, 3 in overall length

Viega

Viega 2918 Copper Tee 1/2 in Press-Fit

SKU CH-2TPM-NQV1V

Copper press-fit tee joins three 1/2 in lines for potable water at 200 psi

  • Press-fit connections install quickly without soldering
  • 200 psi rating handles typical potable water pressure
  • EPDM O-ring seals reliably in hot and cold water
  • Rolled center stop ensures correct insertion depth
  • All three ports accept 1/2 in copper tube

Viega ProPress Copper Tee 2918

This copper tee connects three half-inch tubes using press-fit joints for potable water systems. The 2918 model includes a rolled centre stop on each branch to prevent over-insertion during assembly. EPDM O-rings seal every connection and the fitting handles up to 200 psi working pressure. It arrives new and ready for professional installation.

Rolled centre stop and EPDM seals

The integrated centre stop on all three ports stops the tube at the correct depth without measuring. EPDM O-rings provide the watertight seal instead of solder or flux, reducing fire risk and installation time. No additional sealant or flux is required because the press tool compresses the ring directly. The copper body resists corrosion in typical plumbing environments.

Suits installers using ProPress tools

Plumbers with a compatible press tool can join three half-inch copper lines quickly and without open flame. The tee is not for gas, steam or high-temperature hydronic loops beyond the rated pressure. Builders needing larger diameters, reducing branches or threaded ends should select a different fitting. Anyone without a press tool cannot install this product.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 80% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameViega

Questions about this item

Will the EPDM O-rings inside the Viega 2918 tee need replacement after years of potable-water service?

The EPDM O-rings are designed for the life of the fitting under normal potable-water conditions; no scheduled replacement is required.

What pressure limit will be reached first if this 1/2 in copper tee runs continuously at its maximum rating?

The fitting is rated for 200 psi maximum operating pressure; sustained use at that pressure is the design limit.

Does the copper tee generate heat or noise when pressurised water flows through it all day?

Copper conducts water temperature but the tee itself adds no heat or noise; any sound comes from the pump or flow velocity.

More in Hose Fittings, Adapters & Clamps

Similar items