Viega 95130 MegaPress tee 3/4 x 3/4 x 1/2 in
Stainless-steel press tee connects 3/4 in and 1/2 in tubing rated to 200 psi and 250 °F
- 304 stainless steel resists corrosion in demanding piping systems
- Press connection on all three ends enables fast, flame-free installation
- Rated for 200 psi working pressure across the full assembly
- Operates reliably from 0 to 250 degrees Fahrenheit
- Meets ASME B31.1, B31.3 and B31.9 piping code requirements
Press Tee for Stainless Systems
The Viega 95130 MegaPress tee joins three stainless-steel tubes in a single press operation. Its 304 stainless construction resists corrosion in hydronic heating, compressed air and industrial process piping. The press-to-connect design eliminates open flames and threading on site.
Installers Who Need Fast, Flame-Free Joints
This tee suits contractors who want a permanent, leak-tight connection without welding or soldering. It is not intended for systems that exceed 200 psi or 250 °F, nor for applications requiring a different alloy or a larger branch size.
Rated for 200 psi and 250 °F
The fitting handles typical hydronic and low-pressure steam loads within the stated pressure and temperature limits. It meets ASTM A312, ASME B31.1, B31.3 and B31.9 standards. Installations beyond these ratings will require a heavier-duty component.
How it compares
Measured against everything we stock in Drain Cleaners & Plumbing Tools, at today’s prices. Recalculated every night.
- Price $131.99
- Pricier than about 65% of the 1,087 comparable items (median $57.99).
Specifications
| Product | |
|---|---|
| Brand name | VIEGA |
Questions about this item
What press tool and jaw size are needed to install the Viega 95130 MegaPress tee?
The tee uses Press x Press x Press connections for 3/4 in and 1/2 in tube sizes, so you need a compatible press tool with jaws for both diameters.
Can the 304 stainless steel tee join to existing carbon-steel piping in a B31.9 building-service system?
Yes, the fitting meets ASME B31.9 and is made of 304 stainless steel, which is commonly joined to carbon steel using approved transition methods for building-service piping.
How can I verify the joint is holding its 200 psi rating after pressing?
Pressurise the system up to 200 psi and inspect each pressed connection for leaks; the fitting is rated for 0 °F to 250 °F service per the listed standards.
More in Drain Cleaners & Plumbing Tools
Similar items
Anvil
Anvil 361109846 Black Forged Steel 45 Degree Lateral Class 3000 equipment
$132.99
0.00162579BTC
In stock