Viega Megapress Stainless 316 Reducing Tee 90130 3/4" x 3/4" x 1/2
Stainless-steel 316 reducing tee with three press-fit connections joins 3/4" and 1/2" tubing for potable water at 200 psi and 250 °F
- Press-fit connection installs without welding or threading
- Reducing tee joins 3/4 in and 1/2 in lines in one fitting
- 316 stainless steel body resists corrosion in potable water
- EPDM O-ring seals to 200 psi and 250 °F
- Compact 4 17/32 in length fits tight spaces
Reducing Tee 3/4" x 3/4" x 1/2
The Viega Megapress Stainless 316 reducing tee joins three press-fit connections in potable-water systems. Two 3/4 in branches and one 1/2 in branch allow a smaller line to split from a main run without additional adapters. It is suited for installers who need a single fitting to handle the transition.
Press-fit ends with EPDM seals
Each outlet uses a press-fit connection that locks onto stainless tubing when crimped with the correct tool, eliminating threading or soldering on site. The 316-grade stainless body resists corrosion in aggressive water conditions while the EPDM O-rings maintain a watertight seal up to 200 psi and 250 °F. Overall length is 4 17/32 in for tight routing.
Replaces threaded or soldered tees
This fitting replaces separate reducers and tees that would otherwise require multiple joints and more labour. The jump is worth it when a project demands fewer leak paths, faster assembly and the long-term durability of 316 stainless in potable-water service.
How it compares
Measured against everything we stock in Plumbing Valves & Valve Assemblies, at today’s prices. Recalculated every night.
- Price $179.99
- Pricier than about 77% of the 720 comparable items (median $47.49).
Specifications
| Product | |
|---|---|
| Brand name | Viega Megapress Stainless 316 |
Questions about this item
What pressure does the press-fit connection handle at 250 °F?
The 316 stainless press-fit tee is rated for 200 psi at 250 °F, with EPDM O-rings on all three ports.
How much space does the 4 17/32 in overall length need in a trench?
The reducing tee measures 4 17/32 in end-to-end, so allow that clear span plus tool swing room for the press jaws.
Which jaw profile seals the 1/2 in branch on a Megapress 90130?
Use a standard Megapress jaw set; press the 3/4 in run ports first, then the 1/2 in branch, ensuring each O-ring seats fully before the next crimp.
More in Plumbing Valves & Valve Assemblies
