We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze reducing tee with two press-fit ends and one threaded branch

Viega

Viega ProPress 2917.2ZL Bronze Reducing Tee 1" x 1" x 3/4

SKU CH-60WY-D0460

Bronze reducing tee joins two 1 in press-fit lines to a 3/4 in FNPT branch for potable water, rated 200 psi at 250 °F with EPDM seal

  • Reduces pipe size with 1" to 3/4" transition
  • Press-fit ends enable fast, flameless installation
  • Bronze body meets ASTM B75 and B88 standards
  • EPDM O-ring seals up to 200 psi pressure
  • Rated for 250 °F hot-water service

ProPress Bronze Reducing Tee

The Viega ProPress 2917.2ZL is a bronze reducing tee designed for potable water systems. It connects two 1 in copper tube press-fit ends with a 3/4 in FNPT threaded branch. The fitting ships new and ready for professional installation.

Press-Fit and FNPT Connection Mix

Side A and Side B use press-fit connections for 1 in copper tube size while Side C provides a 3/4 in FNPT thread. This specific combination determines whether the tee matches the pipe layout and transition required on the job.

Suited for Potable Water Press Systems

Plumbers working on potable water lines who need a 1 in by 1 in by 3/4 in reducing transition with press and threaded ends will find this fitting appropriate. Installers requiring all-press connections or different pipe sizes should look at other configurations.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $31.99
Pricier than about 71% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameViega

Questions about this item

How does the 200 psi rating hold up in a real installation?

The bronze body and EPDM O-ring are tested to 200 psi maximum operating pressure, so the joint stays sealed at full system pressure without additional reinforcement.

What does the ASTM B75 and B88 listing actually limit?

Those standards fix the bronze alloy composition and the copper tube dimensions, so the press-fit jaws and the FNPT threads both meet the same dimensional tolerances every time.

What clearance do I need for the 3 5/8 in overall length?

The tee measures 3 5/8 in end-to-end, so allow at least that much straight run plus the press-tool swing radius on each 1 in copper side and the 3/4 in FNPT branch.

More in Hose Fittings, Adapters & Clamps

Similar items