We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three press-fit ends, silver finish

Viega

Viega ProPress 2918 Copper Reducing Tee 3/4 x 3/4 x 1

SKU CH-WTZQ-EW3WY

Copper reducing tee joins 3/4 in and 1 in lines with press-fit ends rated to 200 psi

  • Press-fit joints install fast without soldering
  • EPDM O-ring seals reliably in potable water systems
  • Reducing tee connects 3/4 in, 3/4 in and 1 in copper tubes
  • Copper construction handles 200 psi operating pressure
  • Center stop dimple ensures correct insertion depth

ProPress 2918 Reducing Tee

The Viega ProPress 2918 is a copper reducing tee designed for potable water systems. It connects two 3/4 inch press-fit branches to a 1 inch press-fit run, making it suitable for plumbers joining different tube sizes in residential or commercial installations.

Press-Fit Copper Construction

Each of the three ports uses a press-fit connection with an EPDM O-ring and a centre stop dimple, so joints are made without flame, solder or flux. The copper body resists corrosion and the 3 3/4 inch overall length fits standard spacing in tight mechanical rooms.

200 psi Pressure Rating

The fitting is rated for a maximum operating pressure of 200 psi, which determines whether it meets the design pressure of the intended water supply system. Buyers needing a higher pressure class should select a fitting rated accordingly.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $29.99
Pricier than about 69% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameViega

Questions about this item

What pressure does the ProPress 2918 press-fit interface hold in service?

The press-fit connections are rated for a maximum operating pressure of 200 psi, which is the limit the interface is designed to contain in potable water installations.

What tube sizes must be prepared for the three ports on this reducing tee?

Two ports accept 3/4 inch copper tube and the third port accepts 1 inch copper tube, so each pipe end must match those exact diameters for a proper press.

How is the ProPress 2918 tee installed and which step is often missed?

Insert each tube fully until it contacts the centre stop dimple inside every port, then press all three joints with a compatible ProPress tool; forgetting to bottom the tube against the stop is the common error.

More in Hose Fittings, Adapters & Clamps

Similar items