We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper 90-degree street elbow press fitting 2 inch ends EPDM O-ring 77072

Viega

Viega ProPress 90 street elbow 2 in 77072

SKU CH-KXAT-NPVGQ

A 2-inch copper press-fit street elbow rated for 200 psi and 250 °F potable-water systems

  • Main materialHAWA
  • Press-fit connection installs without soldering or threading
  • 90-degree street elbow redirects flow in tight spaces
  • Copper construction with EPDM seal handles 200 psi pressure
  • Rated for 250 °F maximum operating temperature
  • Meets ASTM B75 and ASTM B88 standards

Copper press-fit elbow for potable water

The Viega ProPress 77072 is a 90-degree street elbow made from copper with an EPDM O-ring. It joins a 2-inch press-fit connection to a 2-inch FTG connection in potable-water systems. The fitting meets ASTM B75 and ASTM B88 and is rated for 200 psi at 250 degrees F. Installers who need a compact direction change in copper pipe use this fitting.

Press connection removes need for solder or flux

The press-fit end creates a permanent, leak-tight seal when crimped with a compatible ProPress tool. No open flame, flux or solder is required, so installation is faster and safer in occupied buildings. The FTG end inserts into a standard copper fitting for a second press joint. This combination suits repairs and new runs where flame-free work is specified.

Rated for 200 psi and 250 degrees F only

The fitting must not be used above its listed pressure or temperature limits. It is not approved for gas, compressed air or high-temperature steam service. The copper body and EPDM seal are not compatible with petroleum-based fluids or aggressive chemicals. Systems that exceed 200 psi or 250 degrees F require a different fitting.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $60.99
Pricier than about 67% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameVIEGA PROPRESS
Size & build
Main materialHAWA

Questions about this item

Will the EPDM O-ring need replacement after years of service?

The EPDM O-ring is rated for up to 250 degrees F and 200 psi; replace it if leaks appear or during any system overhaul.

What pressure limit is reached first during continuous high-pressure use?

The fitting is rated to 200 psi maximum operating pressure; sustained operation above that level will exceed its design limit.

How much heat does the copper body transfer when hot water runs all day?

Copper conducts heat efficiently; at the 250 degrees F maximum temperature the fitting will become very hot to the touch.

More in Drain Stoppers, Strainers & Traps

Similar items