visiPower Sewer Pipe Inspection Camera 9Inch IPS 1080P Self-Leveling 512HZ Locator 7mm Cable 30m

9-Inch IPS Sewer Inspection Camera

The visiPower sewer pipe inspection camera combines a 9-inch colour IPS monitor with a 1080P self-levelling camera head. A 7 mm fibre-glass push cable extends 30 metres and carries an IP68-rated stainless-steel probe with twelve adjustable LEDs and a 145-degree viewing angle. A built-in 512 Hz transmitter allows underground location of the probe using the supplied receiver. The system records video, audio and stills to an included 16 GB TF card and offers 5× digital zoom plus an on-screen metre counter.

Suited for Drain Contractors and Utility Locators

Plumbers and drainage specialists who need a self-levelling image, integrated 512 Hz sonde and long-run push cable will find the kit matches their workflow. The 8-hour main-unit battery and 10-hour locator battery support full-day inspections without recharging. Buyers who require a smaller-diameter cable for tight bends, a longer push length than 30 metres or a pan-and-tilt camera head should consider other equipment.

Straightforward Setup with Cable Care

Connect the camera head to the reel, power on the monitor and the locator, then insert the TF card to begin recording. The fibre-glass rod resists corrosion and cold but can kink if forced past sharp offsets; feed it slowly and use the metre counter to track distance. Clean the stainless-steel probe and lens after each job to maintain the IP68 seal and LED brightness.