VIVE TP-S-755 3H/2C Non-Programmable Thermostat
Non-programmable thermostat with 4-square-inch backlit display, glow-in-the-dark light button, and PTAC capability for conventional or heat pump systems
- Product typeNon-Programmable Thermostats
- Non-programmable simplicity for straightforward temperature control
- Supports up to 3H/2C stages for heat pump systems
- Separate heating and cooling swing adjustments for cycle control
- Selectable filter change indicator reminds you when to service
- 4-square-inch backlit display with glow-in-the-dark light button
What this thermostat controls
The VIVE TP-S-755 is a non-programmable thermostat built for conventional heating, cooling and heat pump installations. It supports up to three heating and two cooling stages, plus PTAC capability, so it fits a wide range of residential and light commercial systems. A 4-square-inch backlit display and glow-in-the-dark light button make adjustments easy in low light.
Replacing a basic or older stat
If your current unit only handles single-stage equipment or lacks a filter change indicator, this model adds multi-stage support and selectable filter reminders. Separate heating and cooling swing adjustments let you fine-tune cycle rates for comfort and efficiency. The jump is worth it when you need stage control for a heat pump or want a clearer display without learning a programmable interface.
Check wiring and system type first
Verify that your existing wiring provides the terminals required for up to 3H/2C operation and that your equipment is compatible with conventional, heat pump or PTAC configurations. The thermostat is non-programmable, so buyers who want scheduled temperature changes will need a different model. Ensure the mounting location suits the backlit display size.
How it compares
Measured against everything we stock in Thermostats & Thermostat Accessories, at today’s prices. Recalculated every night.
- Price $163.99
- Pricier than about 78% of the 286 comparable items (median $78.49).
Specifications
| Product | |
|---|---|
| Product type | Non-Programmable Thermostats |
Questions about this item
Does the TP-S-755 need a C-wire for power?
The thermostat operates with standard HVAC wiring; a common wire is not required for basic operation but may be needed for continuous backlight use.
Which wiring terminals must be connected for a heat-pump installation?
Connect R, C, Y1, Y2, W1, W2, O/B, G and L terminals according to the wiring diagram for 3H/2C heat-pump staging.
How often should the filter-change indicator be reset after replacing the air filter?
Press the filter button after each filter replacement; the indicator tracks run time and will remind you again based on the selected interval.
More in Thermostats & Thermostat Accessories
Similar items
SIEMENS Modulating Spring-Return Actuator 20 In-Lbs 90 Deg 30 Sec
- Learning Thermostats
WHITE RODGERS (EMERSON ELEC) PG9A38JTL24 Thermostat 24 38 .87 180
Parker Thermostatic Expansion Valve 5-8 Tons R-410A 60 in capillary
- Learning Thermostats
Peco T12532-IAQ Thermostat, 12 sq in display
- Learning Thermostats
- White





