We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VOVOV

VOVOV Antminer L3++ 580Mh/s handheld pcs accessory

SKU CH-S7A8-KMGDB

Scrypt ASIC miner delivering 580 Mh/s at 942 W with included 220 V Bitmain PSU

  • Scrypt mining at 580 Mh/s maximum hashrate
  • 942 W power draw for efficient operation
  • 220 V input voltage required for safe use
  • Bitmain power supply included with the miner
  • Listed by manufacturer on 14 March 2023

Mining hardware identity

The VOVOV Antminer L3++ is a Scrypt-algorithm ASIC miner rated at 580Mh/s with a 942W power draw. It ships new with an original Bitmain power supply and requires a 220V input. This unit targets operators who run dedicated Dogecoin or Litecoin mining farms and can provide the necessary electrical infrastructure.

Suitability and limits

Buyers needing a quiet, low-power device for home or office use should look elsewhere because the 942W consumption and cooling demands require industrial-grade power and ventilation. The hardware is also unsuitable for anyone without access to a stable 220V supply, as incorrect voltage will damage the miner. It does not support algorithms other than Scrypt.

Deciding specification

The single figure that determines fit is the 580Mh/s hashrate at 942W on the Scrypt algorithm. If your profitability model requires a different efficiency ratio or a higher throughput, this model will not meet the target. Confirm your electricity cost and 220V availability before purchase.

How it compares

Measured against everything we stock in Handheld Computer & PDA Add-Ons, at today’s prices. Recalculated every night.

Price $272.99
Pricier than about 79% of the 624 comparable items (median $56.49).

Specifications

No published specifications for this item yet.

Questions about this item

What input voltage must my mains supply provide for the Antminer L3++?

The unit requires a 220V supply; connecting it to a different voltage can damage the miner.

How does the 942W power draw of the L3++ affect a circuit shared with older mining gear?

At 942W the L3++ adds a heavy continuous load, so the circuit and wiring must be rated for the combined draw of all devices running together.

How can I confirm the L3++ is delivering its rated 580Mh/s after setup?

Check the miner's status dashboard or pool-side hashrate reporting; a stable reading around 580Mh/s shows the unit is operating as specified.

More in Handheld Computer & PDA Add-Ons

Similar items