Vszerda 1.0m Waterproof Dual USB 3.0 Extension AUX Flush Mount U3-383-2P-1.0M
A one-metre waterproof extension adds two USB 3.0 ports and an AUX jack to a dashboard panel
- Waterproof panel mount protects connections from moisture
- Dual USB 3.0 ports deliver 3.0 speeds for fast charging
- 0 metre cable reaches dash from hidden source
- 5 cm head fits standard 3 cm dashboard cut-out
- Flush-mount design keeps dashboard clean and factory-looking
1.0 m waterproof dual USB 3.0 flush-mount cable
This 1.0 m extension brings two USB 3.0 ports and an AUX jack to a dashboard or panel. A rubber-sealed cover protects the mount from moisture and debris. The 3 cm diameter head fits a standard cut-out and clips in place for a clean, flush finish. It suits vehicle installs as well as marine or industrial panels where a weather-resistant connection is needed.
Dual USB 3.0 ports with 4.5 cm mount headroom
Each port delivers USB 3.0 bandwidth for fast data transfer and charging while the 4.5 cm head depth clears most dash thicknesses. The single 1.0 m tail routes to a source hub or head unit without excess slack. Two devices can run simultaneously, but the shared cable limits combined throughput to one USB 3.0 channel. The AUX jack carries analogue audio only; no digital or video signals are supported.
Replaces loose adapters and single-port mounts
Builders replacing a single USB socket or a dangling adapter gain a tidy, sealed dual-port station with audio pass-through. The upgrade is worthwhile when a permanent, waterproof fit matters more than maximum port count. Installations needing more than two USB connections or a longer reach to the source hub will require a different solution.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 60% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Questions about this item
Will the 3.0 ports on this 1.0m cable work with my older USB 2.0 flash drives and phone chargers?
Yes, the USB 3.0 ports are backward compatible so USB 2.0 devices will function normally at their rated speeds.
How can I confirm the flush mount is seated and the waterproof seal is effective after I install it in a 3cm dashboard hole?
The mount head clips securely into a 3cm cut-out; press until it sits flush with the 4.5cm head length visible and close the rubber cover to engage the waterproof seal.
Does the package include the 3cm hole saw or any wiring adapters I might need for the AUX connection?
The box contains the 1.0m dual USB 3.0 car mount cable with accessories; a hole saw and any AUX wiring adapters are not included and must be sourced separately.
More in USB Cords & Extension Cables
Similar items
Jansicotek PQ003 USB4 cable 5 ft 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
Vszerda USB-C to Mini DisplayPort adapter 4K 2K 60Hz
- USB Type C
- USB Type C
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable





