Vszerda 2-Port Internal USB 3.0 20-Pin Header to 2× USB 3.0 A 10-Inch Cable
Adds two internal USB 3.0 Type-A ports from a 20-pin motherboard header with a 10-inch cable for 5 Gbps data transfer
- Connection typeLighting Connector to USB A
- Adds two internal USB 3.0 ports from one 20-pin header
- Up to 5 Gbps data transfer speed for fast device access
- 10-inch cable reduces strain on the motherboard header
- Black 20-pin to dual Type-A female adapter cable
- Cleaner case build by connecting internal drives directly to the motherboard
Internal USB 3.0 Header Adapter
The Vszerda cable converts a single 20-pin motherboard header into two internal USB 3.0 Type-A female ports. It is intended for builders who need to connect internal card readers or hard drives directly to the board. The 10-inch length reduces strain on the header for a reliable fit. No external routing is required.
Build Quality and Daily Use
Black cable sleeving protects the conductors inside a standard chassis. Two downstream Type-A sockets accept common internal peripherals without adapters. The single 20-pin plug seats securely in the motherboard header. Installation stays inside the case for a cleaner cable run.
Thermals Noise and Power
Passive design adds no fans or active cooling to the system. Power is drawn directly from the motherboard header within USB 3.0 limits. Data transfers run at up to 5 Gbps without extra heat. Silent operation suits any build where noise matters.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 88% of the 15,227 comparable items (median $14.99).
Specifications
| Ports & slots | |
|---|---|
| Connection type | Lighting Connector to USB A |
Questions about this item
What data rate does the USB 3.0 20-pin header support on this cable?
The 20-pin header is compliant with USB 3.0 specifications and delivers up to 5Gbps transfer speed.
What clearance is needed for the 10-inch cable and dual Type-A ports inside a case?
The 10-inch length reduces strain on the motherboard header; allow space for two USB 3.0 Type-A female connectors and cable routing.
How is the adapter installed and which orientation mistake should be avoided?
Plug the 20-pin female connector into the motherboard USB 3.0 header, aligning the keyed notch; forcing it backwards bends pins.
More in USB Cords & Extension Cables
Similar items
Tripp Lite U322-006 USB 3.0 A Male to B Male cable 6 ft
- USB A to USB B
- Consumer Electronics
STARTECH UUSBHAUB3RA USB 2.0 A to Right Angle Micro B Cable 3 ft 91 cm
- USB A to Micro USB
- USB 2.0
ESTONE Essager XC100W USB-C cable 100W 480Mbps blue 6.6ft
- USB Type-C
- USB-C Cable
STARTECH USB3SEXT6BK usb cable
- Connector on First…
- Data Transfer Cable





