Vszerda 4715MS-23T-B50 120×120×38 mm AC 230 V case fan
120 mm AC 230 V axial fan delivering 2800 rpm airflow at 45 dB for industrial chassis cooling
- AC 230 V power for direct mains connection
- 2800 rpm airflow at 45 dB noise
- 120 × 120 × 38 mm standard mounting footprint
- 2-pin BTH connector for quick installation
- Replacement part for NMB 4715MS-23T-B50 units
AC 230 V case fan for industrial enclosures
This Vszerda 4715MS-23T-B50 is a 120×120×38 mm axial fan powered directly from 230 V AC mains at 50/60 Hz. It suits builders and maintainers who need a drop-in replacement for NMB original parts in server racks, telecom cabinets or industrial chassis where DC power is not available. The black frame and 2-pin BTH connector match the legacy mounting pattern.
2-pin BTH connector and fixed-speed operation
The bundled 2-pin BTH connector provides a simple polarity-free hookup to existing wiring harnesses without adapters. No PWM or voltage-control circuitry is present, so the fan runs at a constant 2800 rpm whenever mains power is applied, delivering 45 dB of acoustic output. This fixed-speed behaviour means no software configuration or motherboard header is required.
15/14 W power draw and 2800 rpm airflow headroom
At 15 W on 50 Hz and 14 W on 60 Hz the unit moves enough air for typical 12038 form-factor cooling slots in power supplies, UPS units or dense networking gear. It will not suit builds that demand variable-speed quieting, PWM fan curves or lower-than-45 dB noise floors. Buyers needing speed control, DC voltage input or a different connector pitch should look elsewhere.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $54.99
- Pricier than about 90% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How often will the 2-pin BTH connector or sleeve bearings need servicing on the 4715MS-23T-B50?
The 2-pin BTH connector is a simple push-fit and has no moving parts; the fan uses sleeve bearings that typically run for years before any lubrication or replacement is considered.
What stops the 4715MS-23T-B50 from spinning faster during continuous 230 V AC operation?
The motor is wound for 2800 rpm at 50/60 Hz, so line frequency and the 15/14 W power ceiling set the hard speed limit under sustained load.
How much heat and noise does the 4715MS-23T-B50 add when running all day at 230 V AC?
It draws 15 W at 50 Hz or 14 W at 60 Hz and produces 45 dB of airflow noise; the metal frame conducts some warmth but stays safe to touch.
More in PC Cooling Fans
Similar items
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
SXDOOL 5915PC-23T-B20 172×150×38 mm 230 V AC axial case fan
- 170 mm
- 2500-2,999 RPM





