We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter cable with RP-SMA female bulkhead and dual male ends

Vszerda

Vszerda BFN00302 RP-SMA Female to Dual RP-SMA Male Splitter Cable 15cm

SKU CH-MEP6-HQPNH

Splits one RP-SMA female bulkhead port into two RP-SMA male connectors using 15 cm RG316 50 ohm coaxial cable

  • Product colorBlack
  • RP-SMA female bulkhead splits to two RP-SMA male connectors
  • 15 cm RG316 coaxial cable maintains 50 ohm impedance
  • Connects one antenna port to two devices such as routers or mini PCIe cards
  • Compatible with 5.8 GHz FPV cameras and wireless video extenders
  • Black BFN00302 adapter includes single Y-type splitter cable

Vszerda BFN00302 RP-SMA Splitter Cable

This 15 cm adapter splits a single RP-SMA female bulkhead port into two RP-SMA male connections using RG316 coaxial cable. It suits installers who need to connect dual antennas to one radio module in routers, hotspots or Mini PCIe cards. The 50 ohm impedance matches standard Wi-Fi equipment. Buyers needing SMA rather than RP-SMA connectors cannot use this cable.

Passive coaxial splitter with 50 ohm impedance

The RG316 cable and gold-plated connectors maintain 50 ohm continuity across the Y-junction without active components. No external power is required and the assembly adds negligible insertion loss in normal 5.8 GHz operation. Heat and noise are not factors for this passive part. Builders wanting signal amplification must add a separate powered device.

Single 15 cm Y-cable in the package

The box contains only the splitter cable itself; no mounting hardware, sealing washers or configuration software are included. The bulkhead female end secures through a panel cut-out while the two male leads attach to antennas or extension cables. Users planning outdoor or vibration-prone mounts must source their own weatherproofing and strain relief.

How it compares

Measured against everything we stock in Wi-Fi Antennas & Wireless Bridges, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 96% of the 399 comparable items (median $31.99).

Specifications

Product
Brand nameVszerda
Model nameBFN00302
Part numberBFN00302
Product colorBlack

Questions about this item

How do I mount the RP-SMA female bulkhead connector on a router panel and avoid cross-threading?

Insert the RP-SMA female bulkhead connector through the panel cut-out from the front, then tighten the supplied hex nut from the rear by hand first to prevent cross-threading before final torque with a spanner.

What maintenance does the RG316 coaxial cable need over time?

Inspect the RG316 cable periodically for kinks, jacket cracks or corrosion on the 50 Ohm RP-SMA connectors; replace the assembly if shielding is damaged or VSWR rises.

What is the first performance limit when splitting a signal with this 15 cm Y-cable?

The splitter divides power equally, so each output sees roughly 3 dB less signal than the input, which becomes the limiting factor before cable loss at 50 Ohm impedance.

More in Wi-Fi Antennas & Wireless Bridges

Similar items