Vszerda CY-U2-076 9/10Pin Male to USB 2.0 Male Braided Cable 20cm
Connects a motherboard 9/10-pin header to an external USB 2.0 port at 480 Mbps with a 20 cm nylon-braided cable
- Rated speed480 Mbit/s
- Connection typeUsb 2.0
- Cable length0.2
- Connector detailsUsb 2.0
- Product typeUSB 2.0
- Overall length0.2
- Connect motherboard 9/10-pin header to external USB 2.0 port
- Transfer data at up to 480 Mbps with USB 2.0 speed
- Deliver up to 5 V 2 A power to connected devices
- Nylon braided jacket resists tangling and adds durability
- Compact 20 cm length keeps internal routing tidy
Motherboard header adapter
The Vszerda CY-U2-076 converts an internal 9/10-pin USB 2.0 header into a standard external USB 2.0 Type-A port. It is intended for PC builders who need front-panel or bracket-mounted USB access without occupying a rear I/O slot. The 20 cm length suits tight routing behind a motherboard tray or inside a compact chassis.
Signal and power limits
The cable carries USB 2.0 signalling at 480 megabits per second and supplies up to 5 volts at 2 amperes from the header. No active electronics are present, so thermals and noise are not applicable; power draw matches the attached peripheral up to the header rating. The short run keeps voltage drop minimal for compliant devices.
Braided construction and fit
A nylon braided jacket resists tangling and abrasion during assembly and later service. The 9/10-pin plug fits the common keyed header found on most desktop boards, while the Type-A end accepts any USB 2.0 peripheral. Builders who require longer reach or internal device mounting instead of an external port should choose a different cable.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 92% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Chenyang |
| Model name | CY-U2-076 |
| Product type | USB 2.0 |
| Performance | |
| Rated speed | 480 Mbit/s |
| Ports & slots | |
| Connection type | Usb 2.0 |
| Connector details | Usb 2.0 |
| Size & build | |
| Cable length | 0.2 |
Questions about this item
How do I plug the 9/10Pin male end into my motherboard header without bending pins?
Align the missing-pin key on the 9/10Pin connector with the blocked hole on the motherboard USB header, press straight down until the shroud seats fully, then secure the external USB 2.0 Type-A port to a chassis slot.
Will the nylon braid or the 9/10Pin connector need replacement after repeated plug cycles?
The nylon braid is rated for long-term durability and the 9/10Pin header uses standard gold-plated pins; no scheduled replacement is required unless physical damage occurs.
At what point does the 20 cm length or 5 V 2 A power limit become a bottleneck during sustained transfers?
The 20 cm cable meets USB 2.0 signal-integrity specs at 480 Mbps, and the 5 V 2 A ceiling is reached only when a connected device draws more than 2 A continuously.
More in USB Cords & Extension Cables
Similar items
Rocstor Y10C142-B1 USB-C to USB-A 2.0 adapter
- USB C to USB A
- Consumer Electronics
STARTECH UUSBHAUB3RA USB 2.0 A to Right Angle Micro B Cable 3 ft 91 cm
- USB A to Micro USB
- USB 2.0
Belkin F3U155BT1.8M USB cable 1.8m USB-A to Mini USB
- USB B to Mini USB
- Others
Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
Tripp Lite UR020-003-RA 3 ft USB 2.0 reversible right-angle cable
- Connector on First…
- Consumer Electronics





