We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black axial fan ninety-two by ninety-two by thirty-eight millimetres three wires

Vszerda

Vszerda Delta PFB0924GHE 92x92x38mm DC 24V 0.76A Axial Fan

SKU CH-54C6-QCWKT

A 92 mm square DC 24 V axial fan with double ball bearings, spinning at 6000 rpm and rated at 60.5 dB

  • High airflow at 6000 RPM for efficient cooling
  • Double ball bearing ensures long-lasting reliability
  • Low 0.76 A draw keeps power consumption minimal
  • CE certified for safety and compliance
  • Compact 92×92×38 mm fits tight enclosures

24 V 92 mm Axial Fan

This Vszerda Delta PFB0924GHE is a new 92 mm square axial fan with a 38 mm frame depth. It runs on 24 V DC, draws 0.76 A and spins at 6000 min-1 using a double ball bearing. The unit produces 60.5 dB of noise and carries CE approval.

Suits 24 V cooling slots; not for other voltages

The fan fits equipment designed for a 24 V DC supply and the 92 x 92 x 38 mm mounting pattern. Buyers who need a different supply voltage, a thinner or thicker frame, or a quieter acoustic level should look at other models.

Double ball bearing at 6000 min-1

The double ball bearing supports the rated 6000 min-1 speed and 24 V operation. This bearing type and speed rating are the key specifications that determine whether the fan matches the thermal and reliability requirements of the target system.

How it compares

Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.

Price $51.99
Pricier than about 79% of the 5,998 comparable items (median $24.99).

Specifications

No published specifications for this item yet.

Questions about this item

Will the 0.76 A draw at 24 V limit continuous operation?

The fan draws 0.76 A at 24 V DC, so your power supply must sustain that current without voltage sag for all-day use.

How loud and hot does the 6000 min-1 fan get after hours of running?

Noise is rated at 60.5 dB at 6000 min-1; the double ball bearing handles heat well, but the unit has no built-in thermal throttle.

What connector or wiring must I already have to install this 3-wire axial fan?

You need a 24 V DC source and a 3-pin header or solder points matching the fan’s three leads for power, ground and tach signal.

More in Tech Gadgets & Accessories

Similar items