Vszerda PCI-E 4.0 M.2 M-Key to Oculink SFF-8612 Adapter 2260
Connects an OCuLink SFF-8612 device to an M.2 2260 M-key slot with PCIe 4.0 speeds up to 64 Gbps
- Transmits PCIe signals via NVMe protocol for direct SSD connection
- Up to 64 Gbps transfer rate with NVMe 1.2 support
- Connects U.2 SSD through SFF-8612 interface to M.2 slot
- M.2 2260 form factor fits key M PCIe slots
- Bootable from UEFI 2.3.1 with Linux 4.3+ and Windows 8.1+
PCI-E 4.0 M.2 to Oculink adapter
This Vszerda adapter converts a single M.2 M-key slot into an Oculink SFF-8612 interface. It transmits PCI Express signals using the NVMe protocol and supports NVMe 1.2. The card fits the 2260 form factor and connects directly to a compatible M.2 slot.
For adding external NVMe storage via Oculink
Builders who want to attach a U.2 or Oculink SSD to an internal M.2 slot can use this host adapter. It is not suited for systems lacking a free M.2 M-key connector. Buyers needing multiple drive connections or a different host interface should look elsewhere.
PCI-E 4.0 x4 signal support up to 64 Gbps
The adapter carries a PCI-E 4.0 link with a data rate up to 64 Gbps through the SFF-8612 connector. This bandwidth ceiling determines whether the attached SSD can reach its rated speed. Verify that the host platform provides a PCI-E 4.0 M.2 slot to utilise the full capability.
How it compares
Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.
- Price $23.99
- Typical for this category: the median of 5,998 items is $24.99.
Specifications
No published specifications for this item yet.
Questions about this item
What free slot must the motherboard provide for the Vszerda M.2 2260 adapter to be installed?
The motherboard needs an available M.2 slot with key M that is based on PCIe.
Will the adapter run at PCIe 3.0 speeds if my platform only supports PCIe 3.0?
Yes, the card transmits PCI Express signals using the NVMe protocol and will operate at the speed of the host slot, up to 32 Gbps on PCIe 3.0.
How can I confirm the Vszerda adapter is functioning after installing it and connecting an NVMe drive?
The drive should appear in the system BIOS or UEFI firmware and be visible to the operating system once the appropriate drivers are loaded.
More in Tech Gadgets & Accessories
Similar items
Sycelu RF Page Turner K3-Green with Reading Light and Tracker
- 2.9 in (7.37 cm)
- Sycelu, 7U-0UB0-ZLJ…
NSI YDF00360015 USB 3.0 to SATA IDE Adapter
- Power Supply: DC 5…
- Adapter/Converter
Censisiy RF Page Turner with LCD Power Display, Pink
- 1/2 in"*4 in
- Censisiy, Pink, 33…





